[cisco-voip] 7940 load issue

[lelio at uoguelph.ca]

Settings
3 - network
**# -unlock
Scroll Down to erase configuration
Press yes softkey
Press save softkey


Doing this from memory so hopefully I got all the steps

Lelio Fulgenzi, Senior Analyst
Computing & Communications
University of Guelph
519-824-4120 x56354

...sent from my iPod - please pardon my fat fingers ;)

[XKJ2000]

On 2010-02-05, at 7:40 AM, "James Dust" <james.dust at charles-stanley.co.uk 
 > wrote:

> We have an issue with a couple of 2nd hand Cisco 7940 phones we have  
> purchased.
>
> They are booting up but not requesting an image from the TFTP  
> server, they just seem stuck.
>
> Is there a different factory restore procedure for 7940’s?
>
>
> Regards
>
> James Dust
> Team Leader
> ICT Network Infrastructure & Communications Department
> Charles Stanley & Co Ltd
> Tel: 020 7149 6314
> Mob: 07989 491136
> mailto: james.dust at charles-stanley.co.uk
>
>
>
>
> Consider the environment - Think before you print
>
> The contents of this email are confidential to the intended  
> recipient and may not be disclosed. Although it is believed that  
> this email and any attachments are virus free, it is the  
> responsibility of the recipient to confirm this.
>
> You are advised that urgent, time-sensitive communications should  
> not be sent by email. We hereby give you notice that a delivery  
> receipt does not constitute acknowledgement or receipt by the  
> intended recipient(s).
>
> Details of Charles Stanley group companies and their regulators  
> (where applicable), can be found at this URL http://www.charles-stanley.co.uk/contact-us/disclosure/
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100205/234e877e/attachment.html>