[cisco-voip] Display name on IP phone for incoming calls

Cristobal Priego cristobalpriego at gmail.com
Thu Feb 11 11:52:03 EST 2010


correct me if i'm wrong but you need to activate this service with your SP,
there is nothing you can do on CUCM or the Gateways in order to dislay the
name of the incoming calls on your ip phones, the information element
services is activated at the carrier side. if you do a debug isdn q931 you
should see the caller id of the caller and name if you don't see the name on
the debug you need to talk to your carrier

2010/2/11 Keith Allan <Keith.Allan at 5i.co.uk>

>  Does anyone know how to display a name on the IP phones for incoming
> calls base on the calling CLI in CUCM?  I know there are several
> applications around but our customer only needs to display one particular
> incoming CLI number as a name.  There is a TCL script but as this is not
> supportable they are not keen to use this option.  Ideally, we are looking
> at configuring something in CUCM rather than the gateway as they have a
> large number of gateways.
>
>
>
> Regards,  Keith**
>
>
>
>
> This message has been scanned by MailController<http://www.mailcontroller.altohiway.com/>
> .
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100211/66ecd575/attachment.html>


More information about the cisco-voip mailing list