[cisco-voip] Checking hardware -- PRI

[Scott Voll]

Cablelength is about 10-15 feet from the NIU.  Linecode b8zs, and framing is
esf.

Scott

On Mon, Feb 15, 2010 at 8:20 AM, Jason Shearer <jshearer at amedisys.com>wrote:

>  What does your physical buildout look like?  Cablelength, linecode,
> framing?
>
>
>
> Jason
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Scott Voll
> *Sent:* Monday, February 15, 2010 10:10 AM
> *To:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] Checking hardware -- PRI
>
>
>
> show isdn stat shows multiple frames established which makes me still think
> it's a Telco issue.  any other ideas?
>
>
>
> Scott
>
>
>
> ps. I have no mgcp -- mgcp.
>
> On Mon, Feb 15, 2010 at 7:53 AM, Scott Voll <svoll.voip at gmail.com> wrote:
>
> I have a ticket in with the local telco, but I have a D channel on my PRI
> that is bouncing about every 1-3 minutes.
>
>
>
> How do I check to make sure it's not a hardware issue on my side?
>
>
>
> it's a 2851 with vwic-2mft-t1=
>
>
>
> I see on the controller in the last 24 hours it has 1610 path code
> violations, 9 line code violoations, 2 serverly err secs, and 6 unavail
> secs. but nothing in the current interval.
>
>
>
> I have shut not shut the interface but I continue to get RTMT reports that
> the D channel is down(every 1 - 3 minutes).  Router has been up for multiple
> days.(had a power outage last week). but d channel went down yesterday
> afternoon.
>
>
>
> What else should I be looking at.
>
>
>
> Thanks
>
>
>
> Scott
>
>
>
> ps. CM 6.1.3 and MGCP.
>
>
>
> ------------------------------
> *** NOTICE--The attached communication contains privileged and confidential
> information. If you are not the intended recipient, DO NOT read, copy, or
> disseminate this communication. Non-intended recipients are hereby placed on
> notice that any unauthorized disclosure, duplication, distribution, or
> taking of any action in reliance on the contents of these materials is
> expressly prohibited. If you have received this communication in error,
> please delete this information in its entirety and contact the Amedisys
> Privacy Hotline at 1-866-518-6684. Also, please immediately notify the
> sender via e-mail that you have received this communication in error. ***
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100215/44afe145/attachment.html>