[cisco-voip] auto-provision

[Dew Swen]

Hi guys,

In the UC 7.x SRND it says:

When WAN connectivity to the central site is reestablished, the branch IP
phones automatically
re-register with the Unified CM cluster and resume normal operation. The
branch SRST router deletes
its information about the IP phones and reverts to its standard routing or
gateway configuration.
Unified CME running in SRST mode at the branch can choose to save the
learned phone and line
configuration to the running configuration on the Unified CME router by
using the auto-provision
option. If auto-provision none is configured, none of the auto-provisioned
phone or line configuration
information is written to the running configuration of the Unified CME
router. Hence, no configuration
change is required on Unified CME if the IP phone is replaced and the MAC
address changes.

What does auto-provision really do? I'm confused. With the auto-provision
CME in SRST mode config, is the SRST config generated by itself??

-
Dew Swen
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100217/718bfee6/attachment.html>