[cisco-voip] H323 GW configuration

[Peter Slow]

what do you mean by "local phone?"

On Thu, Feb 18, 2010 at 3:38 PM, Kin Wai <kinwai at singnet.com.sg> wrote:
> Hi,
>
> I’m have a gateway registered to Gatekeeper.
>
>
>
> Currently,
>
> Local call to remote sites through the GK --- OK
>
> Remote sites to PSTN through local gateway ---- OK (using the tech-prefix)
>
> Remote sites to Local Phone ----- NOT OK (using the same tech-prefix)
>
> I have the following configuration :
>
> dial-peer voice 20 voip
>
>  destination-pattern 6.T
>
>  session target ras
>
> !
>
> dial-peer voice 21 pots
>
>  destination-pattern 65.T
>
>  port 0/1/0:15
>
>
>
> *I have excluded the h323-gateway commands*
>
> The tech prefix for this site is 65
>
>
>
> What do I need to do in order for the remote site to call the local phones?
> The gatekeeper is a 3rd party gatekeeper.
>
> I suppose there’s no issue with the communications as remote sites user can
> make outgoing call to PSTN.
>
>
>
> Do I need to enable “allow connections h323 to h323” under voice service
> voip ? Or I need to create an additional dial-peer to cater for the local
> phones?
>
>
>
> I tried to apply translation-rule to strip away the tech-prefix or even make
> it the full DID number under dial-peer 20, but it still won’t work.
>
>
>
> Anyone have any clue about this problem?
>
>
>
> Thanks in advance!
>
>
>
> Regards,
>
> Kin Wai
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>