[cisco-voip] Newbie Question

[Jason Shearer]

There is an option for PDF or CSV output for the CAR utilization report.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Friday, February 19, 2010 10:21 AM
To: Frank Arrasmith
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Newbie Question

gateway utilization is part of CAR. i can't recall if it allows for CSV file export.



---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
                              - LFJ (with apologies to Mr. Popeil)


----- Original Message -----
From: "Frank Arrasmith" <frank.arrasmith at gmail.com>
To: "Lelio Fulgenzi" <lelio at uoguelph.ca>
Cc: cisco-voip at puck.nether.net
Sent: Friday, February 19, 2010 11:19:30 AM GMT -05:00 US/Canada Eastern
Subject: Re: [cisco-voip] Newbie Question

I was looking for more of a method to trend this over time.  I have seen and started messing with RTMT, but all that seemed to be real-time, not so much trending, unless I have missed something.  I am trying to capture peak utilization over time, like week/month/Year to date.  Is this Gateway Utilization part of RTMT, or another tool?
On Fri, Feb 19, 2010 at 9:01 AM, Lelio Fulgenzi <lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>> wrote:
the gateway utilization reports will give you a good idea on the percentage of utilization throughout the time period. for example, it will tell you for a given period whether that gateway is being used 100%.

it's probably not what your looking for, but will give you an idea.


---
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Cooking with unix is easy. You just sed it and forget it.
                              - LFJ (with apologies to Mr. Popeil)



----- Original Message -----
From: "Frank Arrasmith" <frank.arrasmith at gmail.com<mailto:frank.arrasmith at gmail.com>>
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Sent: Friday, February 19, 2010 10:44:45 AM GMT -05:00 US/Canada Eastern
Subject: [cisco-voip] Newbie Question
Hi All,
   First time poster and kind of a newbie on CUCM.  One of my first tasks at my new position is to try to measure call volume on our gateways(MGCP/PRI) so my company can determine if they are being used efficiently.  Currently, I can only calculate erlang capacity based on the amount of T1's that we have, but have not found a good way to measure if we are getting anywhere near that capacity.  I am fine with trying to work it out myself for the learning part, but I would like to see if I am heading in the right direction at least.  The few methods that I have heard to measure BHT are:

IPSLA's on GW routers
CAR utility in Call Manager
some custom MIB's for cacti( not used in our network, so not really an option)
Expensive add-on to Solarwinds(used in our network, but the whole point was to study for cost reduction, so not an option either)

Any help you could provide would be greatly appreciated.  Thanks,

Frank


_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net> https://puck.nether.net/mailman/listinfo/cisco-voip


________________________________
*** NOTICE--The attached communication contains privileged and confidential information. If you are not the intended recipient, DO NOT read, copy, or disseminate this communication. Non-intended recipients are hereby placed on notice that any unauthorized disclosure, duplication, distribution, or taking of any action in reliance on the contents of these materials is expressly prohibited. If you have received this communication in error, please delete this information in its entirety and contact the Amedisys Privacy Hotline at 1-866-518-6684. Also, please immediately notify the sender via e-mail that you have received this communication in error. ***
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100219/ab3f6caa/attachment.html>