[cisco-voip] Newbie Question

Lelio Fulgenzi lelio at uoguelph.ca
Fri Feb 19 11:20:41 EST 2010


gateway utilization is part of CAR. i can't recall if it allows for CSV file export. 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 


----- Original Message ----- 
From: "Frank Arrasmith" <frank.arrasmith at gmail.com> 
To: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
Cc: cisco-voip at puck.nether.net 
Sent: Friday, February 19, 2010 11:19:30 AM GMT -05:00 US/Canada Eastern 
Subject: Re: [cisco-voip] Newbie Question 

I was looking for more of a method to trend this over time. I have seen and started messing with RTMT, but all that seemed to be real-time, not so much trending, unless I have missed something. I am trying to capture peak utilization over time, like week/month/Year to date. Is this Gateway Utilization part of RTMT, or another tool? 


On Fri, Feb 19, 2010 at 9:01 AM, Lelio Fulgenzi < lelio at uoguelph.ca > wrote: 




the gateway utilization reports will give you a good idea on the percentage of utilization throughout the time period. for example, it will tell you for a given period whether that gateway is being used 100%. 

it's probably not what your looking for, but will give you an idea. 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1 
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN) 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Cooking with unix is easy. You just sed it and forget it. 
- LFJ (with apologies to Mr. Popeil) 



----- Original Message ----- 
From: "Frank Arrasmith" < frank.arrasmith at gmail.com > 
To: cisco-voip at puck.nether.net 

Sent: Friday, February 19, 2010 10:44:45 AM GMT -05:00 US/Canada Eastern 
Subject: [cisco-voip] Newbie Question 




Hi All, 
First time poster and kind of a newbie on CUCM. One of my first tasks at my new position is to try to measure call volume on our gateways(MGCP/PRI) so my company can determine if they are being used efficiently. Currently, I can only calculate erlang capacity based on the amount of T1's that we have, but have not found a good way to measure if we are getting anywhere near that capacity. I am fine with trying to work it out myself for the learning part, but I would like to see if I am heading in the right direction at least. The few methods that I have heard to measure BHT are: 

IPSLA's on GW routers 
CAR utility in Call Manager 
some custom MIB's for cacti( not used in our network, so not really an option) 
Expensive add-on to Solarwinds(used in our network, but the whole point was to study for cost reduction, so not an option either) 

Any help you could provide would be greatly appreciated. Thanks, 

Frank 



_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-voip 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100219/1c36123b/attachment.html>


More information about the cisco-voip mailing list