[cisco-voip] Getting Unity to work when in SRST mode

[Leslie Meade]

Let's send it to the correct user group this time J

 

One way it can be done, depending on how many people need voicemail
while the link is down, as it uses spare DID's

Is to change the outbound calling number to a DID that is not in use and
when it hits your gateway/callmanager use a translation pattern to
change the calling number back into their local. Since the link is down
the default (if you got it setup) it to on fail goto voicemail.

Example CME user has ext 2106 , get the dial plan to ring the "new DID"
604-345-5670, when it rings this number make a translation pattern to
change it  back into 2106.
But this depends on how many unused DID's you got and how many people.
It is not very scalable buy it gets around the RDNIS issues and it
works.



Leslie



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100219/274e778e/attachment.html>