[cisco-voip] Wrong Time on Phones

[Carter, Bill]

I found the answer. You are correct Tim. I will try this in the AM and report back.

"legacy" means any 3rd gen phone version before 9.0(2). So it is not necessarily the hardware model, it is the fact that they run Phone Loads prior to 9.0(2).

Work Around: " Have to use a time zone that has a *"

******

CSCtc52241 Bug Details
clarify timezones for legacy/non-legacy phone loads
Symptom:
All phone loads that come with CM 7.1.3 are considered legacy phone loads, but because there is no documentation covering this, it's assumed that this is talking about really old phone loads.

Traditionally "legacy" phones have referred to:
12SP+ or 30VIP phones
7940/7960 phones
7970 phone loads before 6.0(4).

However in this context "legacy" means any 3rd gen phone version before 9.0(2). 3rd gen phones include:
7911,7941,7942,7961,7962,7970,7971,7906,7945,7965,7975

The following phone models should not be affected:
7905, 7912, 7940, 7960


What happens is when a time zone that doesn't have the * is configured,phones with firmware version prior to 9.0(2), will use GMT and not what they are configured to use. 

Conditions:

CUCM 7.1.3.1000-11

Workaround:
Have to use a time zone that has a *. Some documentation that discusses the phone load will resolve what is a legacy and non-legacy phone load.

Bottom of Form


From: Tim Frazee [mailto:tfrazee at gmail.com] 
Sent: Thursday, February 25, 2010 4:45 PM
To: Carter, Bill
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Wrong Time on Phones

As I understand it, all 7900 series phones are Legacy phones.
On Thu, Feb 25, 2010 at 3:47 PM, Carter, Bill <bcarter at sentinel.com> wrote:
Are 7962Gs considered legacy phones?

Sent from my iPhone

On Feb 25, 2010, at 3:32 PM, "Tim Frazee" <tfrazee at gmail.com> wrote:
Whats the timezone name? I've seen this when you use the "timezone named" ones instead of "America/Chicago" or "America/New York".

For the 7900 series phones, you need to use the time zone names with the * in the name.
On Thu, Feb 25, 2010 at 3:14 PM, Carter, Bill <bcarter at sentinel.com> wrote:
UCM 7.1.3.31900-1
7962 SCCP Load 8.5(3)

CallManager is sync'd with a public NTP server and displays the correct time with timezone. (verified with show status and utils ntp status)

I have a Date/Time Group configured with CST GMT - 6:00. The Device pool has this Date Time Group.

All of the phones time is 6hrs off. They display GMT time. I have created other Date/Time groups with different offsets and the time on the phones never changes from GMT.

Ideas? This is a new 7.1.3 install, not an upgrade from 5.1.3.



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip