[cisco-voip] problem with ISDN and H323 (UNCLASSIFIED)

Girard, Jeffrey COL MIL USA jeffrey.girard at us.army.mil
Mon Jan 4 12:42:28 EST 2010


Classification: UNCLASSIFIED
Caveats: NONE

Provide the output of debug voice dialpeer

-----------------------------------------------------------
Jeffrey T. Girard ("Jeff")
COL, 53
Future Forces Integration Directorate (FFID), Deputy - Networks
office:  (915)568-1240  DSN 978
Mobile:  (915)727-4222
reply to:  jeffrey.girard at us.army.mil


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of victor
rodriguez
Sent: Monday, January 04, 2010 10:23 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] problem with ISDN and H323

 
Hi, i wish you a better year than 2009.
 
I have a problem with the following configuration. please help!!!!!!!!1
 
PSTN -----> PBX (Nortel) --ISDN---> RTR 2821 ----->CallManager ----->
IPPHONE
 
I make a call form PBX to IPPHONE, i hear the ring, answered the call,
but in the router the call is droped with user no answer.
 
*Jan  4 16:51:03.165: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8  callref
= 0x4E00
        Bearer Capability i = 0x8090A3
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA9839F
                Exclusive, Channel 31
        Progress Ind i = 0x8581 - Call not end-to-end ISDN, may have
in-band info
        Calling Party Number i = 0x0080, '5559996600'
                Plan:Unknown, Type:Unknown
        Called Party Number i = 0x81, '4965'
                Plan:ISDN, Type:Unknown
        Sending Complete
*Jan  4 16:51:03.181: ISDN Se0/0/0:15 SERROR: isdn_get_name_from_gtd:
false ret *Jan  4 16:51:03.181: ISDN Se0/0/0:15 SERROR:
process_pri_simple: NO name in GTD *Jan  4 16:51:03.181: ISDN Se0/0/0:15
Q931: TX -> CALL_PROC pd = 8  callref = 0xCE00
        Channel ID i = 0xA9839F
                Exclusive, Channel 31
*Jan  4 16:51:18.217: ISDN Se0/0/0:15 Q931: TX -> DISCONNECT pd = 8
callref = 0xCE00
        Cause i = 0x8092 - No user responding *Jan  4 16:51:18.245: ISDN
Se0/0/0:15 Q931: RX <- RELEASE pd = 8  callref = 0x4E00 *Jan  4
16:51:18.249: ISDN Se0/0/0:15 Q931: TX -> RELEASE_COMP pd = 8  callref =
0xCE00
 
I simulate  call usinf csim start IPPHONE, i answared the call and i see
the established call
 
MXODFVPNNEOCCM#sh call act voi com
 <callID>  A/O FAX T<sec> Codec       type        Peer Address       IP
R<ip>:<udp>
Total call-legs: 1
       220 ORG     T0     g729r8      VOIP        P4965
10.15.180.137:18236
 
If i make a call for IPPHONE to PBX it works
 
MXODFVPNNEOCCM#
*Jan  4 16:56:31.837: ISDN Se0/0/0:15 Q931: Applying typeplan for
sw-type 0x16 is 0x0 0x0, Calling num 4965 *Jan  4 16:56:31.841: ISDN
Se0/0/0:15 Q931: Sending SETUP  callref = 0x00AC callID = 0x802D switch
= primary-qsig interface = User *Jan  4 16:56:31.841: ISDN Se0/0/0:15
Q931: TX -> SETUP pd = 8  callref = 0x00AC
        Bearer Capability i = 0x8090A3
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA98381
                Exclusive, Channel 1
        Calling Party Number i = 0x0081, '4965'
                Plan:Unknown, Type:Unknown
        Called Party Number i = 0x80, '2071'
                Plan:Unknown, Type:Unknown *Jan  4 16:56:31.921: ISDN
Se0/0/0:15 Q931: RX <- CALL_PROC pd = 8  callref = 0x80AC
        Channel ID i = 0xA98381
                Exclusive, Channel 1
*Jan  4 16:56:31.925: ISDN Se0/0/0:15 Q931: RX <- ALERTING pd = 8
callref = 0x80AC
        Progress Ind i = 0x8182 - Destination address is non-ISDN *Jan
4 16:56:47.273: ISDN Se0/0/0:15 Q931: RX <- CONNECT pd = 8  callref =
0x80AC
        Progress Ind i = 0x8182 - Destination address is non-ISDN *Jan
4 16:56:47.273: ISDN Se0/0/0:15 SERROR: isdn_init_name_iecs: Connected
name not supported for this switch type *Jan  4 16:56:47.273:
%ISDN-6-CONNECT: Interface Serial0/0/0:0 is now connected to 2071 N/A
*Jan  4 16:56:47.273: %ISDN-6-CONNECT: Interface Serial0/0/0:0 is now
connected to 2071 N/A *Jan  4 16:56:47.273: ISDN Se0/0/0:15 Q931: TX ->
CONNECT_ACK pd = 8  callref = 0x00AC *Jan  4 16:57:34.045:
%ISDN-6-DISCONNECT: Interface Serial0/0/0:0  disconnected from 2071 ,
call lasted 46 seconds *Jan  4 16:57:34.049: ISDN Se0/0/0:15 Q931: TX ->
DISCONNECT pd = 8  callref = 0x00AC
        Cause i = 0x8090 - Normal call clearing *Jan  4 16:57:34.077:
ISDN Se0/0/0:15 Q931: RX <- RELEASE pd = 8  callref = 0x80AC *Jan  4
16:57:34.077: ISDN Se0/0/0:15 Q931: TX -> RELEASE_COMP pd = 8  callref =
0x00AC
 
 
 


________________________________

Keep your friends updated- even when you're not signed in.
<blockedhttp://www.microsoft.com/middleeast/windows/windowslive/see-it-i
n-action/social-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm
:SI_SB_5:092010> 
Classification: UNCLASSIFIED
Caveats: NONE




More information about the cisco-voip mailing list