[cisco-voip] problem with ISDN and H323

[Kevin Thorngren]

There is a 15 second gap between the Call Proceeding and the Disconnect:
*Jan  4 16:51:03.181: ISDN Se0/0/0:15 Q931: TX -> CALL_PROC pd = 8   
callref = 0xCE00
         Channel ID i = 0xA9839F
                 Exclusive, Channel 31
*Jan  4 16:51:18.217: ISDN Se0/0/0:15 Q931: TX -> DISCONNECT pd = 8   
callref = 0xCE00
         Cause i = 0x8092 - No user responding


Check the CSS of the GW in CUCM and make sure it can call the phone.   
Maybe the GW is hitting a unexpected pattern which is waiting for more  
digits.

Kevin

On Jan 4, 2010, at 12:22 PM, victor rodriguez wrote:

>
> Hi, i wish you a better year than 2009.
>
> I have a problem with the following configuration. please  
> help!!!!!!!!1
>
> PSTN -----> PBX (Nortel) --ISDN---> RTR 2821 ----->CallManager ----- 
> > IPPHONE
>
> I make a call form PBX to IPPHONE, i hear the ring, answered the  
> call, but in the router the call is droped with user no answer.
>
> *Jan  4 16:51:03.165: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8   
> callref = 0x4E00
>         Bearer Capability i = 0x8090A3
>                 Standard = CCITT
>                 Transfer Capability = Speech
>                 Transfer Mode = Circuit
>                 Transfer Rate = 64 kbit/s
>         Channel ID i = 0xA9839F
>                 Exclusive, Channel 31
>         Progress Ind i = 0x8581 - Call not end-to-end ISDN, may have  
> in-band info
>         Calling Party Number i = 0x0080, '5559996600'
>                 Plan:Unknown, Type:Unknown
>         Called Party Number i = 0x81, '4965'
>                 Plan:ISDN, Type:Unknown
>         Sending Complete
> *Jan  4 16:51:03.181: ISDN Se0/0/0:15 SERROR:  
> isdn_get_name_from_gtd: false ret
> *Jan  4 16:51:03.181: ISDN Se0/0/0:15 SERROR: process_pri_simple: NO  
> name in GTD
> *Jan  4 16:51:03.181: ISDN Se0/0/0:15 Q931: TX -> CALL_PROC pd = 8   
> callref = 0xCE00
>         Channel ID i = 0xA9839F
>                 Exclusive, Channel 31
> *Jan  4 16:51:18.217: ISDN Se0/0/0:15 Q931: TX -> DISCONNECT pd = 8   
> callref = 0xCE00
>         Cause i = 0x8092 - No user responding
> *Jan  4 16:51:18.245: ISDN Se0/0/0:15 Q931: RX <- RELEASE pd = 8   
> callref = 0x4E00
> *Jan  4 16:51:18.249: ISDN Se0/0/0:15 Q931: TX -> RELEASE_COMP pd =  
> 8  callref = 0xCE00
>
> I simulate  call usinf csim start IPPHONE, i answared the call and i  
> see the established call
>
> MXODFVPNNEOCCM#sh call act voi com
>  <callID>  A/O FAX T<sec> Codec       type        Peer Address        
> IP R<ip>:<udp>
> Total call-legs: 1
>        220 ORG     T0     g729r8      VOIP        P4965     
> 10.15.180.137:18236
>
> If i make a call for IPPHONE to PBX it works
>
> MXODFVPNNEOCCM#
> *Jan  4 16:56:31.837: ISDN Se0/0/0:15 Q931: Applying typeplan for sw- 
> type 0x16 is 0x0 0x0, Calling num 4965
> *Jan  4 16:56:31.841: ISDN Se0/0/0:15 Q931: Sending SETUP  callref =  
> 0x00AC callID = 0x802D switch = primary-qsig interface = User
> *Jan  4 16:56:31.841: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8   
> callref = 0x00AC
>         Bearer Capability i = 0x8090A3
>                 Standard = CCITT
>                 Transfer Capability = Speech
>                 Transfer Mode = Circuit
>                 Transfer Rate = 64 kbit/s
>         Channel ID i = 0xA98381
>                 Exclusive, Channel 1
>         Calling Party Number i = 0x0081, '4965'
>                 Plan:Unknown, Type:Unknown
>         Called Party Number i = 0x80, '2071'
>                 Plan:Unknown, Type:Unknown
> *Jan  4 16:56:31.921: ISDN Se0/0/0:15 Q931: RX <- CALL_PROC pd = 8   
> callref = 0x80AC
>         Channel ID i = 0xA98381
>                 Exclusive, Channel 1
> *Jan  4 16:56:31.925: ISDN Se0/0/0:15 Q931: RX <- ALERTING pd = 8   
> callref = 0x80AC
>         Progress Ind i = 0x8182 - Destination address is non-ISDN
> *Jan  4 16:56:47.273: ISDN Se0/0/0:15 Q931: RX <- CONNECT pd = 8   
> callref = 0x80AC
>         Progress Ind i = 0x8182 - Destination address is non-ISDN
> *Jan  4 16:56:47.273: ISDN Se0/0/0:15 SERROR: isdn_init_name_iecs:  
> Connected name not supported for this switch type
> *Jan  4 16:56:47.273: %ISDN-6-CONNECT: Interface Serial0/0/0:0 is  
> now connected to 2071 N/A
> *Jan  4 16:56:47.273: %ISDN-6-CONNECT: Interface Serial0/0/0:0 is  
> now connected to 2071 N/A
> *Jan  4 16:56:47.273: ISDN Se0/0/0:15 Q931: TX -> CONNECT_ACK pd =  
> 8  callref = 0x00AC
> *Jan  4 16:57:34.045: %ISDN-6-DISCONNECT: Interface Serial0/0/0:0   
> disconnected from 2071 , call lasted 46 seconds
> *Jan  4 16:57:34.049: ISDN Se0/0/0:15 Q931: TX -> DISCONNECT pd = 8   
> callref = 0x00AC
>         Cause i = 0x8090 - Normal call clearing
> *Jan  4 16:57:34.077: ISDN Se0/0/0:15 Q931: RX <- RELEASE pd = 8   
> callref = 0x80AC
> *Jan  4 16:57:34.077: ISDN Se0/0/0:15 Q931: TX -> RELEASE_COMP pd =  
> 8  callref = 0x00AC
>
>
>
>
> Keep your friends updated— even when you’re not signed in.  
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100104/471dce6f/attachment.html>