[cisco-voip] phone load update before cucm upgrade

[Nate VanMaren]

Peer firmware is in CM6, but it is not on the non-java phones like 7940/60 7905/7912.  Highly recommended.

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Shearer
Sent: Tuesday, January 05, 2010 2:46 AM
To: redsnapper; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] phone load update before cucm upgrade

Sounds like a plan.  That is how I have done it in the past (8K phones over 300 sites).  Something else to look into is peer firmware sharing.  Don't think it is available as an option in CUCM 6x and there are phone load requirements for enablement.

Jason

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of redsnapper
Sent: Tuesday, January 05, 2010 2:32 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] phone load update before cucm upgrade

Hi,

We're planning to upgrade our CUCM cluster to version 7.1(3) from 6.1(2). Since the phones are distributed to multiple low bandwidth remote locations, we want to update phone loads group by group in several days before the actual CUCM upgrade. We're thinking of changing the phone load fields of the phones using bulk administration, without changing the device defaults so that during work hours no accidental upgrades occur, and only the intended phones are upgraded during the night.

Is it a good practice, do you have any other suggestions or comments?

Thanks a lot in advance...

Bars.



________________________________
*** NOTICE--The attached communication contains privileged and confidential information. If you are not the intended recipient, DO NOT read, copy, or disseminate this communication. Non-intended recipients are hereby placed on notice that any unauthorized disclosure, duplication, distribution, or taking of any action in reliance on the contents of these materials is expressly prohibited. If you have received this communication in error, please delete this information in its entirety and contact the Amedisys Privacy Hotline at 1-866-518-6684. Also, please immediately notify the sender via e-mail that you have received this communication in error. ***


 NOTICE: This email message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100105/b9014f6b/attachment.html>