[cisco-voip] convert Avaya T1Pri mod pak to Comcast ENS (mpls) thenback to other end Avaya T1Pri Mod Pak

[Jason Aarons (US)]

I've used T-CCS (Transparent Common Channel Signaling ) with Nortel's
before, should work for Avaya.

http://www.cisco.com/en/US/docs/ios/12_1t/12_1t3/feature/guide/dt_tccs.h
tml

 

While searching I see 12.4.20T added QSIG over IP.  If your Avaya'ss are
new enough you could QSIG/IP between them

http://www.cisco.com/en/US/docs/ios/voice/sip/configuration/guide/tunnel
ing_qsig_ps6441_TSD_Products_Configuration_Guide_Chapter.html#wp1054633

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Gregory Wenzel
Sent: Tuesday, January 05, 2010 3:47 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] convert Avaya T1Pri mod pak to Comcast ENS (mpls)
thenback to other end Avaya T1Pri Mod Pak

 

Question for the group...

 

My thoughts are that this would be similar to STUN but with voice. Im
almost embarased asking this but Im having a mental block and wanted to
be sure this is possible before I quote it and do the work. Im tempted
to use pdi but asking questions occaisonally comes back to haunt... 

 

 

I know I can use VWIC2-1MFT-T1PRI cards crossover to Avaya PBX T1 Pri
cards BUT--> then bridge it onto a highspeed mpls Comcast ENS ring
(100MB) via the 2911 Wan port  and point a route towards Head end HQ
using a 3945 (same components) with other end VWIC2-1MFT-T1Pri to Avaya
T1 Pri on the HQ Avaya HQ site. Basically Extending the PRI over an mpls
circuit (NOT VOIP) We are migrating them off verizon T1 Pri's and onto
this ring, Cost savings are enormous

 

Thank you in advance

 

Greg

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100105/bf73352e/attachment.html>