[cisco-voip] Ghost of CUCM 6.0

[Alessandro Bertacco]

Thank you very much Dana, I think your method is better than the ghost.

Thank you very much

Regards

Alessandro

2010/1/7 Dana Tong (AU) <Dana.Tong at didata.com.au>

>  Hi Alessandro,
>
>
>
> Can’t you just perform a “switch-version” to roll back?
>
>
>
> Or if you want a disk image, what about breaking the mirror and  pop out
> one of the disks? If the upgrade fails, turn off the server, pop the
> upgraded disk, and re-insert the original disk.
>
> The server should boot up off just one disk. So long as the disk is in the
> same position (slot 0 or 1) as it was when it was active.
>
>
>
> Or alternatively if you have spare compatible disks, you can remove one,
> and insert the spare. Wait 3-4hrs for the RAID to rebuild before performing
> the upgrade. Again so long as you insert the original disk in its original
> position you should be able to boot off the one disk and then rebuild the
> array.
>
>
> Cheers
>
> Dana
>
>
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Alessandro Bertacco
> *Sent:* Thursday, 7 January 2010 6:58 PM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] Ghost of CUCM 6.0
>
>
>
> Hi guys,
>
>    I'need to upgrade CUCM from release 6.0.1 to 6.1.2, but before i would
> like to back it up using Norton Ghost.
>
>
>
> Does anyone have it done before?
>
>
>
> Do you think that is it a good thinks to do?
>
>
>
> Thank you for your anwers and/or suggestion.
>
> Regards
>
>
>
> Alessandro Bertacco
>
>
> ******************************************************************************
>
> - NOTICE FROM DIMENSION DATA AUSTRALIA
>
> This message is confidential, and may contain proprietary or legally
> privileged information. If you have received this email in error, please
> notify the sender and delete it immediately.
>
>
>
> Internet communications are not secure. You should scan this message and
> any attachments for viruses. Under no circumstances do we accept liability
> for any loss or damage which may result from your receipt of this message or
> any attachments.
>
>
> ******************************************************************************
>
>
>



-- 
Alessandro Bertacco
alessandro.bertacco at gmail.com
Telefono: 0125 55 30 898
Cellulare: +39 347 57 40 900
Fax: 0125 55 45 192
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100107/e74b814e/attachment.html>