[cisco-voip] Calls not completing.....randomly

[Jason Shearer]

Anyone have any clever ideas for tracking down problems with inbound calls randomly not completing successfully?  Two MGCP gateways with three T1 CAS circuits per gateway.  All circuits are in a single trunk group.  Problem isn't isolated to a single DNIS.  Cannot find any pattern.  When call volume is very high it is impossible to debug.  Since they are MGCP controlled we don't get ANI.

Of course Qwest says all is good on their side......

Any ideas would be helpful.

Jason Shearer


________________________________
*** NOTICE--The attached communication contains privileged and confidential information. If you are not the intended recipient, DO NOT read, copy, or disseminate this communication. Non-intended recipients are hereby placed on notice that any unauthorized disclosure, duplication, distribution, or taking of any action in reliance on the contents of these materials is expressly prohibited. If you have received this communication in error, please delete this information in its entirety and contact the Amedisys Privacy Hotline at 1-866-518-6684. Also, please immediately notify the sender via e-mail that you have received this communication in error. ***
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100107/4028c830/attachment.html>