[cisco-voip] call forwarding error

[Scott Voll]

I'm guessing you have already looked, but what CSS is your CFwdAll set to?

Scott

On Fri, Jan 8, 2010 at 6:02 AM, Leslie Meade <lmeade at signal.ca> wrote:

>  It seems that no one is able to call forward their phones from either
> cluster (4.2 or 7.1), to a long distance number. Callforwading to a local
> number there are no issues.
>
>
> When any external callers call into the system, they will either get the
> number is not connected message, fast busy signal, or another provider
> message, internal users can also get this problem.
>
>
>
> The debugs of the routers show that the primary voice gateway is reporting
> issues but I am unable to resolve it
>
>
>
> pak_private_number: Invalid type/plan 0x2 0x8 may be overriden; sw-type 13
>
>
>
> I do not get this error when I dial any long distance calls…
>
>
>
> I have tested by routing the long distance calls out other local and remote
> gateways where the number is still long distance, and the call is completed.
> The remote gateways do not use the same telco.
>
>
>
> I have looked at mapping isdn address on the H.323 gateway to isdn map
> address 1604484XXXX(example) type national plan national and other types of
> plans, types and get the same result of failure.
>
>
>
> I have looked at the route pattern on the 7 box and changed the
> Transformations from Call manager to ISDN, that did not help.
>
>
>
> Could this be a Telco issue that is not allowing us to hairpin the call to
> the long distance? If so why internal calls get the same problem ?
>
> Ideas ?
>
>
>
>
>
> Leslie
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100108/67797d8e/attachment.html>