[cisco-voip] call forwarding error

[Leslie Meade]

It seems that no one is able to call forward their phones from either
cluster (4.2 or 7.1), to a long distance number. Callforwading to a
local number there are no issues. 


When any external callers call into the system, they will either get the
number is not connected message, fast busy signal, or another provider
message, internal users can also get this problem.

 

The debugs of the routers show that the primary voice gateway is
reporting issues but I am unable to resolve it

 

pak_private_number: Invalid type/plan 0x2 0x8 may be overriden; sw-type
13

 

I do not get this error when I dial any long distance calls...

 

I have tested by routing the long distance calls out other local and
remote gateways where the number is still long distance, and the call is
completed. The remote gateways do not use the same telco.

 

I have looked at mapping isdn address on the H.323 gateway to isdn map
address 1604484XXXX(example) type national plan national and other types
of plans, types and get the same result of failure.

 

I have looked at the route pattern on the 7 box and changed the
Transformations from Call manager to ISDN, that did not help.

 

Could this be a Telco issue that is not allowing us to hairpin the call
to the long distance? If so why internal calls get the same problem ?

Ideas ?

 

 

Leslie

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100108/aaeeb5b6/attachment.html>