[cisco-voip] R: [english 100%] Re: [english 100%] Re: CUCM 6.0.1 - After Migration from CCM 4.1 - IP voice Streaming Application don't work

[Alessandro Bertacco]

Hi Peter.  after holidays I come back
I've made the test.
If i place a call directly from two ip phones of the cluster, moh is
reproduced correctly!

If I make an call trough the h.323 gateway (outbound or inbound) I hear the
bip instead of the moh audio.

What do you think?
Is it a gateway problem?
But before the migration all work fine!

Thank you

Alessandro
-----Messaggio originale-----
Da: Peter Slow [mailto:peter.slow at gmail.com] 
Inviato: sabato 26 dicembre 2009 21:06
A: Alessandro Bertacco
Cc: cisco-voip at puck.nether.net
Oggetto: [english 100%] Re: [english 100%] Re: [cisco-voip] CUCM 6.0.1 -
After Migration from CCM 4.1 - IP voice Streaming Application don't work

OK, lets pick two IP phones on the same cluster and reproduce the
problem with a call directly between them. does it happen all of the
time, or just intermittently?

Out of ten "hold" operations where phone A presses the hold button,
how many times do you get tone on hold? what about phone B?

-Peter

On Sat, Dec 26, 2009 at 2:23 PM, Alessandro Bertacco
<alessandro.bertacco at gmail.com> wrote:
> Hi Peter, thank you for your answer.
>
>   The issue affect internal call, IP Phone to Ip Phones and also external
> call made trough H.323 gateway, for call made from all site connected to
the
> cluster.
>
> All 14 remote site are configured with SRST in H.323.
>
> Regards
> Alessandro
>
> -----Messaggio originale-----
> Da: Peter Slow [mailto:peter.slow at gmail.com]
> Inviato: sabato 26 dicembre 2009 19:47
> A: Alessandro Bertacco
> Cc: cisco-voip at puck.nether.net
> Oggetto: [english 100%] Re: [cisco-voip] CUCM 6.0.1 - After Migration from
> CCM 4.1 - IP voice Streaming Application don't work
>
> Alessadro,
>>I've uploaded new .wav file for the Music On Hold, and for Network on
Hold,
> but often, when a call is placed on hold, a BIP is plyed and no MOH
>> music.
>
> Often, or all of the time? Also, to confirm, you hear "beeps" (Tone on
> Hold) in the non working scenario, as opposed to silence?
>
> What types of devices are involved in the call (MGCP Gateway, IP
> phone, cti port, h.323 trunk?) on either side?
>
> -Peter
>
>
> On Sat, Dec 26, 2009 at 9:48 AM, Alessandro Bertacco
> <alessandro.bertacco at gmail.com> wrote:
>>
>>
>> Hi all, and Merry Christmas to every one.
>>
>>
>>
>> I  wrote for a strange issue.
>>
>>
>>
>> CUCM 6.0.1 after migration, no MOH, ANN or CFG working anymore.
>>
>>
>>
>> I've uploaded new .wav file for the Music On Hold, and for Network on
> Hold,
>> but often, when a call is placed on hold, a BIP is plyed and no MOH
music.
>>
>> Transcoding of the uploaded files work perfectly
>>
>>
>>
>> from RTMT i can see a lot of error regarding ANN, MOH, CFB and other IP
>> voice Streaming App
>>
>>
>>
>> Like these:
>>
>>
>>
>> 12/18/2009 11:00:49.717 VoiceStrm|   [ANN][10.1.4.15]
>> DeviceMgr::recvStationStopMediaTransmissionMsg *ERROR* Conference ID is
>> invalid!,
>>
>
passThruPartyID=33773331|<CLID::StandAloneCluster><NID::10.1.4.15><LVL::Erro
> r><MASK::2000>
>>
>>
>>
>>
>>
>> 12/18/2009 11:08:53.480 VoiceStrm|
>> [MOH][10.1.4.15]CTTCPSocket::DestroySocket *ERROR* Invalid socket,
>>
>
m_Socket=-1|<CLID::StandAloneCluster><NID::10.1.4.15><LVL::Error><MASK::0080
>>
>>
>>
>>
>> All service is Running and configured properly
>>
>>
>>
>>
>>
>> I've idea of upgrading the Cluster to the last version of the 6.x CUCM,
> that
>> is the 6.1.(4a)SU2.
>>
>>
>>
>> Do you think can resolve that issue?
>>
>>
>>
>> Thank you to all for replay and help
>>
>>
>>
>> Best Regards
>>
>>
>>
>> Alessandro Bertacco
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
>