[cisco-voip] VG224 with Forced Authorization Code

karuna durai karunad at gmail.com
Mon Jan 11 03:32:05 EST 2010


It will give a beep after your dialed digits... and you need to dial a key
(FAC) and press "#" key..

On Sat, Jan 9, 2010 at 3:12 PM, Alan Su <cj.alan at gmail.com> wrote:

> Dear All,
>
> I have VG224 with 24 analog phone connected to it and use SCCP to
> registered to CCM4.2. I setup forced authorization code to control the
> outbound PSTN calls for some users/extensions. It works very well in IP
> Phone but not in the analog phones. When using the analog phones to dial the
> restriced number, instead of hearing the tone prompt for forced
> authorization code input, it just play fast busy tone.
>
> Does it need any additional configurations in VG224? Any comments will be
> great help for me, thanks a lot~
>
> Regards,
> Alan
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100111/c476efd7/attachment.html>


More information about the cisco-voip mailing list