[cisco-voip] Incorrect Info being sent to the call logger

[kevin.hobson2000 at ntlworld.com]

Hi,

I have a problem were one of my Voice GW's is sending incomplete info to the Call Logger.

This is the info received from a router working correctly.

dev @ ISDN CDR Collector > cd 145.233.160.112
dev @ ISDN CDR Collector > more detail

Mon Jan 11 01:54:35 2010
        Calling-Station-Id = "82112205"
        Called-Station-Id = "80072222"
        cisco-avpair = "call-id=4B375FC7 FD8811DE 994BF7D6 85AFA44C"
        Acct-Session-Id = "14184/01:34:28.719 UTC Mon Jan 11 2010/LR2131./47534546 FD8811DE 88FC001B D4B7C2F0/originate/VoIP/01:34:3
0.649 UTC Mon Jan 11 2010/01:41:54.669 UTC Mon Jan 11 2010/10/10.201.200.100/47534546 FD8811DE 88FC001B D4B7C2F0"
        Acct-Input-Octets = 444480
        Acct-Output-Octets = 443272
        Acct-Input-Packets = 22224
        Acct-Output-Packets = 22196
        Acct-Session-Time = 444
        User-Name = "82112205"
        Acct-Status-Type = Stop
        User-Service-Type = Login-User
        Client-Id = 145.233.160.112
        Acct-Delay-Time = 0


This is the info being sent from the router that isnt working properly:

Mon Jan 11 05:51:46 2010
        Acct-Session-Id = "00000222"
        Calling-Station-Id = "2062"
        Called-Station-Id = "82723488"
        Proxy-State = "h323-gw-id=LS9515."
        cisco-avpair = "h323-incoming-conf-id=FEEBB56D FDA911DE 8107E760 7AC18C17"
        cisco-avpair = "subscriber=RegularLine"
        cisco-avpair = "session-protocol=cisco"
        cisco-avpair = "gw-rxd-cdn=ton:0,npi:0,#:82723488"
        Acct-Input-Octets = 195480
        Acct-Output-Octets = 193440
        Acct-Input-Packets = 9774
        Acct-Output-Packets = 9672
        Acct-Session-Time = 193
        cisco-avpair = "release-source=1"
        cisco-avpair = "remote-media-address=10.201.172.6"
        cisco-avpair = "outgoing-area=GS1341"
        cisco-avpair = "gw-rxd-cgn=ton:0,npi:0,pi:0,si:3,#:2062"
        cisco-avpair = "gw-final-xlated-cdn=ton:0,npi:0,#:82723488"
        cisco-avpair = "gw-final-xlated-cgn=ton:0,npi:0,pi:0,si:3,#:2062"
        User-Name = "2062"
        Acct-Authentic = None

The only difference i can see on the router is that it has a higher IOS revision.

Has the format changed or been erradicated in later IOS's?

Thanks

Kev