[cisco-voip] Transformation Calling Pattern problem

[davidytk]

Hi All

 

I want to change the phone display number for the calling number (e.g. 911).
It will display 9911 on the phone display.

 

I tried to configure it via the transformation calling pattern (without
partition configure). And enable the phone device pool for the
transformation on the phone configuration.

 

However when 911 dial the phone, the phone display is still not change
(still appear 911 instead of 9911).

 

Is there any step missing for configure this e.g. service parameter.

 

I have tried to reboot the router and CCM and test. The test is still
failed.

 

Thanks

Best Regards

David

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100113/74a3cbf3/attachment.html>