[cisco-voip] Mobility

[Abebe Amare]

verify also the dial-peer configuration on the H.323 gateway.

On Tue, Jan 12, 2010 at 4:46 PM, Kevin Thorngren <kthorngr at cisco.com> wrote:

> Verify the "Rerouting Calling Search Space" configuration in your RDP.
>  This is what is used to place the call to the mobile phone.
>
> Kevin
>
> On Jan 12, 2010, at 7:42 AM, Glen Cobby wrote:
>
>  Hi All,
>>
>> I am configuring Mobility and trying to get the call to ring my mobile and
>> the desk phone. It will not ring the desk phone, I have made sure the phone
>> can call the mobile number, the RDP has the correct CSS's. If I place  a
>> call from one a phone to the IP phone with mobility softkey, when I press
>> the Mobility key it says "Failed to send call to Mobile Phone".
>> When I set this up in my lab I had it working, but I believe I had to
>> restart the CCM Service. Can anyone recall if they had to restart the CCM
>> service to get Mobility working?
>>
>> Thanks
>>
>> Glen
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100112/720ee3e0/attachment.html>