[cisco-voip] Software to rebuild a PUB / SUB

[Ryan Ratliff]

Yes you would order it via PUT and get the 7.1.3 media shipped to you.

You can simply do the upgrade during install with the 7.1.2 DVD and the 7.1.3 upgrade file.  At the beginning of the install it asks if you want to do an upgrade, select yes.

-Ryan

On Jan 12, 2010, at 4:57 PM, Mike King wrote:

I'm still dealing with my dead SUB issue from a few days ago.  Cisco is now hinting that it may be a misconfiguration during the initial install, or serious hardware failure.  (The pub and the sub are not syncing databases)

anywhooo....   They're hinting I might need to rebuild again.

Last time, we ran the 7.1.2 dvd's that we got, and then did the upgrade to 7.1.3.

Is it possible to get the 7.1.3 DVD ISO right off of Cisco?  i.e.  skip a step and go right to correct release?

I was just on cisco's download site, and there is a link to the ordering page.   Does this mean I have to order a DVD?

Mike
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip