[cisco-voip] Software to rebuild a PUB / SUB

[Tim Frazee]

I have done the "load patch during the install process" before. it works
great. takes a little longer, but well worth it.

very similar to slipstreaming microsoft products.

On Tue, Jan 12, 2010 at 4:07 PM, Ryan Ratliff <rratliff at cisco.com> wrote:

> Yes you would order it via PUT and get the 7.1.3 media shipped to you.
>
> You can simply do the upgrade during install with the 7.1.2 DVD and the
> 7.1.3 upgrade file.  At the beginning of the install it asks if you want to
> do an upgrade, select yes.
>
> -Ryan
>
> On Jan 12, 2010, at 4:57 PM, Mike King wrote:
>
> I'm still dealing with my dead SUB issue from a few days ago.  Cisco is now
> hinting that it may be a misconfiguration during the initial install, or
> serious hardware failure.  (The pub and the sub are not syncing databases)
>
> anywhooo....   They're hinting I might need to rebuild again.
>
> Last time, we ran the 7.1.2 dvd's that we got, and then did the upgrade to
> 7.1.3.
>
> Is it possible to get the 7.1.3 DVD ISO right off of Cisco?  i.e.  skip a
> step and go right to correct release?
>
> I was just on cisco's download site, and there is a link to the ordering
> page.   Does this mean I have to order a DVD?
>
> Mike
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100112/c3f3dc9a/attachment.html>