[cisco-voip] SUb:Regd Installation of Unity with Microsoft exchange

[Cristobal Priego]

Failover means that you will have. Unity servers on your cluster for  
high availability. If you are only installing 1 unity serve follow the  
installation guide "without" failover

Sent from my iPhone

On Jan 18, 2010, at 9:14 PM, "sashank" <sasanka.pathi at locuz.com> wrote:

> Dear All,
>
> I have a small doubt. This is the first time i am installing Unity  
> with exchange. I see 2 options that are listed below.
>
>
> •Installation Guide for Cisco Unity Release 5.x in a Unified Messagi 
> ng Configuration with Microsoft Exchange (With Failover Configured)
>
> •Installation Guide for Cisco Unity Release 5.x in a Unified Messagi 
> ng Configuration with Microsoft Exchange (Without Failover)
>
>
>
> What is meant by this. And does any one has installation steps which  
> are clear than that are mentioned in the documents. If so that would  
> be very much helpfull for me.
>
>
> Warm Regards,
>
> Venkata Sasanka.pathi(CELL NO: -91 950  265 2290)
> Consultant | unified communications
> Locuz Enterprise Solutions Ltd. (A Subsidiary of 3i-Infotech)]
> (Office:914066115538)
> sasanka.pathi at locuz.com
> www.locuz.com
>
>
> Go ahead and print this out. It’s okay! The wood and paper industry  
> plants 1.7 million new trees EVERY DAY
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100118/e5f6b7b0/attachment.html>