[cisco-voip] Patch Panel suggestions for VG224

Tue Jan 19 12:02:52 EST 2010

Found this as well...

Looks like the OR-808004389 might fit the bill as well.

Page 22 - for a listing of their panels

http://tiny.cc/8Lwfv

(pdf)

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jeff Garvas
Sent: Tuesday, January 19, 2010 8:09 AM
To: Steve Sarrick
Cc: VOIP Group
Subject: Re: [cisco-voip] Patch Panel suggestions for VG224

Thanks Steve.   I like Ben's because its an RJ45 jack.   So RJ45 patch
cables can be used.   (and its 1U in height)     But I almost bought
this since its graybar and i think they're an approved vendor...

-jeff

On Mon, Jan 18, 2010 at 10:10 AM, Steve Sarrick <ssarrick at drsllc.net>
wrote:

I use an Ortronics panel from Graybar. OR-808004921 is the part number.
One of those and an Amphenol patch (OR-804025PP005-1GY) cable will work
just fine.

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jeff Garvas
Sent: Monday, January 18, 2010 9:52 AM
To: VOIP Group
Subject: [cisco-voip] Patch Panel suggestions for VG224

Does anyone have any patch panels they like that work with the VG224?

I'm looking for something to break it out in a 19" cabinet where I can
use patch cables to patch VG224 ports into an existing IDF.   In the
past I've had it broken out to a 66 block and cross connected into
existing house cable between 66 blocks.

This design is a little different and I'm wondering if anyone has found
a panel I can plug the 25 pair cable into directly and have it line up
properly in the center two pins without breaking it out and punching it
down manually?  I'm thinking I may not find a cable that breaks out the
amphenol connector to 24 RJ45 style jacks properly.

Thanks,

-Jeff

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100119/716cefe5/attachment.html>