[cisco-voip] Conferencing Codecs Across WAN

[Jason Shearer]

And remember to accommodate for DSP requirements based on codecs used.  You can specify what codec are available under the dspfarm commands.

Jason

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Chris Ward (chrward)
Sent: Tuesday, January 19, 2010 1:26 PM
To: Rhodium; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Conferencing Codecs Across WAN

A hardware or DSP conference bridge can input/output different codecs
from the different participants. So you can have a G711 stream from a
phone local to the CFB and then a couple G729 streams from remote
phones.

Make sense?

-----Original Message-----
From: Rhodium [mailto:rhodium_uk at yahoo.co.uk]
Sent: Tuesday, January 19, 2010 10:51 AM
To: cisco-voip at puck.nether.net; Chris Ward (chrward)
Subject: Re: [cisco-voip] Conferencing Codecs Across WAN

Thank you for your swift reply.

So if i set the region of the conference bridge to G729 for all sites,
all calls from the other site will be G729 regardless of the original
codec used?

Thank you,

Jason




_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

*** NOTICE--The attached communication contains privileged and confidential information. If you are not the intended recipient, DO NOT read, copy, or disseminate this communication. Non-intended recipients are hereby placed on notice that any unauthorized disclosure, duplication, distribution, or taking of any action in reliance on the contents of these materials is expressly prohibited. If you have received this communication in error, please delete this information in its entirety and contact the Amedisys Privacy Hotline at 1-866-518-6684. Also, please immediately notify the sender via e-mail that you have received this communication in error. ***