[cisco-voip] Replacing E1 card in MGCP gateway

[Tony Fairhurst]

Have any of you ever replaced a single E1 VWIC2-1MFT-T1/E1 for a dual E1
VWIC2-2MFT-T1/E1 on a MGCP gateway? I need to swap out the single E1
card for a dual E1 card but my concern is does swapping this and then
changing the card type on Call Manager have any effect on the existing
config for the configured single port E1? Does this remove any config on
the port, route groups, route lists and route patterns?

 

 

 

This email has been scanned for all viruses.

Please consider the environment before printing this email.

The content of this email and any attachment is private and may be
privileged. If you are not the intended recipient, any use, disclosure,
copying or forwarding of this email and/or its attachments is
unauthorised. If you have received this email in error please notify the
sender by email and delete this message and any attachments immediately.
Nothing in this email shall bind the Company or any of its subsidiaries
or businesses in any contract or obligation, unless we have specifically
agreed to be bound.

KCOM Group PLC is a public limited company incorporated in England and
Wales, company number 02150618 and whose registered office is at 37 Carr
Lane, Hull, HU1 3RE.

118288 - KCOM Group UK Directory Enquiries. Calls will cost no more than
49p connection + 14p per minute including VAT from a KC or BT landline.
Call charges from mobiles and other networks may vary. If you are
calling from a mobile you will now receive your requested number via
text message. You will not be charged for the text message.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100120/b6ec5f34/attachment.html>