[cisco-voip] switching between calls on 7931?

[Ryan Ratliff]

The key part of that description is "for customers who seek this type of call experience for their users".  

Is it common practice for customers to buy the cheapest they can find without paying attention to the features of what they are buying? IMO you should not be figuring out what these phones can and cannot do after deployment.  

-Ryan

On Jan 21, 2010, at 1:19 PM, Lee wrote:

Personally - I HATE them. :) after dealing with the 7900s.

The buttons stick and/or hard to press.  Call History is lacking in features compared to 7900s.

I hear they are cheaper & they are more aesthetically pleasing to the corporate company's eye.

On Thu, Jan 21, 2010 at 1:11 PM, Ryan Ratliff <rratliff at cisco.com> wrote:
Keep in mind the entire purpose of the 7931 was to replace those key sets (right down to the paper line labels).
The 6900 series is new version in the same line as the 7931.

http://www.cisco.com/en/US/prod/collateral/voicesw/ps6788/phones/ps10326/data_sheet_c78-541199.html

"The Cisco® Unified IP Phone 6900 Series is a new and innovative portfolio of endpoints that deliver affordable, business-grade, voice communication services to customers worldwide. Three models are available: the Cisco Unified IP Phone 6921 (two-line), Cisco Unified IP Phone 6941 (four-line), and Cisco Unified IP Phone 6961 (twelve-line).

All three models support full-duplex speakerphones for a more productive, more flexible, and easier-to-use endpoint experience. All models introduce support for single-call per-line appearance, offering a traditional telephony-like interaction for customers who seek this type of call experience for their users. Fixed keys for hold, transfer, and conference; tri-color LED line and feature keys also make the phone simpler and easier to use."

-Ryan

On Jan 21, 2010, at 12:04 PM, Jason Shearer wrote:

I heard that the 8900 and 9900 phones have this same Call Waiting functionality.....can anyone confirm?

If this is the case I see it as a big step backwards for Cisco.  Who wants a high tech IP phone to act like an 80s key set?

Jason

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of peter ejmont
Sent: Thursday, January 21, 2010 10:58 AM
To: Robin Clayton
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] switching between calls on 7931?

7931 does not support multiple calls on one line. You have to program
additional buttons for that functionality. from product page:

Manage Call Waiting
The 7931G is designed to work as a key system telephone with each button
handling one call. Call waiting calls are normally
presented on a separate line button. A new call can be answered by
pressing the ringing button. The current call is automatically
put on hold. You can toggle between callers by pressing the flashing
line button; the current call is placed on hold automatically.
If you are on a call when a second call comes in, you hear a
call-waiting tone or see a flashing indicator light on the handset
rest, depending on the configuration of your phone, and the call appears
on a separate line button.
• To answer the new call, press the Answer soft key to answer the call.
The call on the other line is automatically put on hold.
• To return to the original call, press the line button of the original
call to reconnect to it.
• For calls on a separate line, press the Line button for the incoming
call. The call on the other line is automatically put on
   hold.
• To return to the original call, press the Line button associated with
the original call.


One way to answer multiple calls to one number is to assign the same
number to different partitions/call search spaces. see this document:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a008009409c.shtml


it works well for 7931.




peter



On Thu, 2010-01-21 at 15:00 +0000, Robin Clayton wrote:
> Hi Everyone.
>
> On My 7940 I can switch between any of the calls that are active,
> holding resuming etc using the up down button.
>
> On my 7931, i can't seem to flick between the calls and can only work
> with the last connected call, once that's finsihed I can get back to a
> previously held call???
>
> Is that normal?
>
> Thanks
>
> Robin
>
>
>
>
> ===============================
> Robin Clayton
> Network Manager
> Tel: 01228822075
>
>
>
>
> Richard Rose Central Academy
> Edgehill Road
> Carlisle
> Cumbria
> CA1 3SL
>
> Tel: 01228 822060
> Fax: 01228 822061
>
> http://www.richardroseacademies.org/
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

*** NOTICE--The attached communication contains privileged and confidential information. If you are not the intended recipient, DO NOT read, copy, or disseminate this communication. Non-intended recipients are hereby placed on notice that any unauthorized disclosure, duplication, distribution, or taking of any action in reliance on the contents of these materials is expressly prohibited. If you have received this communication in error, please delete this information in its entirety and contact the Amedisys Privacy Hotline at 1-866-518-6684. Also, please immediately notify the sender via e-mail that you have received this communication in error. ***
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100121/12b4c1be/attachment.html>