[cisco-voip] Upgrade AIM-CUE to NME-CUE

[Nick]

Thanks for the reply Mark, I just needed to know if it could be done,
version is 7.0.3 and was ordered incorrectly as customer requires more users
configured than the AIM can provide.


2010/1/27 Mark Holloway <mh at markholloway.com>

> I am not sure if you are just asking whether it can be done or you also
> want to know how to do it.  Yes, CUE can be backed up and restored to a
> different CUE module type by using a 'backup server'. Make sure your AIM CUE
> module is on the same version of CUE that will be running on the NME CUE
> module.  IE. do not backup a CUE 3.x database on try to restore on a 7.x
> database.
>
> # offline
> # backup category {all | configuration | historicaldata | data }
> # continue < exits offline mode
> # show backup history < show success/failure
> # show backup server < displays the backup files available on the backup
> server
>
> Swap hardware and configure the basic settings of new NME CUE module.
>
> # show backup server
> # offline
> # restore id <backupID> categroy { all | configuration | data }
> # reload
>
>
> On Jan 27, 2010, at 8:07 AM, Nick wrote:
>
> > I need to upgrade from an AIM-CUE to a NME-CUE, is it going to be
> possible to take a backup of the AIM-CUE and then restore it to the NME-CUE
> once that has been installed and configured.
> _______________________________________________
>  > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100127/8f5e4d6e/attachment.html>