[cisco-voip] CCM 7.1.3 questions

[Matthew Ballard]

Save just saves the configuration on the server, but doesn't apply it to
the phone/device/etc (but if the phone is reset/restart/apply config it
will pick it up after a Save).

Apply Config applies the current configuration to the phone/device/etc
with minimal interference, no re-register, no reboot, etc.

Restart causes a de-register/re-register with the server.

Reset causes a full reboot of the phone.

Most of the time you only need to Save then Apply Config.

Matthew Ballard
Network Manager
Otis College of Art and Design


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of cisco.voip
Sent: Friday, January 29, 2010 10:22 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CCM 7.1.3 questions

Hello all,
Just upgrade from 4.12 to CCM 7.1.3, and a couple of questions:
When is the 'apply config' needed versus just the 'save' button,, do we 
have to apply config and save now?

Also, the reset/restart seems reversed now, the restart makes the phone 
download the config file again versus
the reset which shuts down a device and brings it back up.  Is this
correct?

Thanks
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip