[cisco-voip] CCM 7.1.3 questions

[Mike King]

Makes you wish they had 1 additional button, "Save and Apply Config"

On Sat, Jan 30, 2010 at 5:34 AM, Matthew Ballard <mballard at otis.edu> wrote:

> Save just saves the configuration on the server, but doesn't apply it to
> the phone/device/etc (but if the phone is reset/restart/apply config it
> will pick it up after a Save).
>
> Apply Config applies the current configuration to the phone/device/etc
> with minimal interference, no re-register, no reboot, etc.
>
> Restart causes a de-register/re-register with the server.
>
> Reset causes a full reboot of the phone.
>
> Most of the time you only need to Save then Apply Config.
>
> Matthew Ballard
> Network Manager
> Otis College of Art and Design
>
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of cisco.voip
> Sent: Friday, January 29, 2010 10:22 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] CCM 7.1.3 questions
>
> Hello all,
> Just upgrade from 4.12 to CCM 7.1.3, and a couple of questions:
> When is the 'apply config' needed versus just the 'save' button,, do we
> have to apply config and save now?
>
> Also, the reset/restart seems reversed now, the restart makes the phone
> download the config file again versus
> the reset which shuts down a device and brings it back up.  Is this
> correct?
>
> Thanks
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100130/77a70dd3/attachment.html>