[cisco-voip] 2900 and 3900 routers license

Ahmed Elnagar ahmed_elnagar at rayacorp.com
Thu Jul 1 09:57:20 EDT 2010


No my router was purchased for Security bundle and then we needed to run
it as a voice gateway.

 

 Best Regards;

  Ahmed Elnagar

  Senior Network PS Engineer

  Mob: +2019-0016211

  CCIE#24697 (Voice)

   

 

From: Bill [mailto:bill at hitechconnection.net] 
Sent: Thursday, July 01, 2010 4:16 PM
To: Ahmed Elnagar; 'Jason Aarons (US)'
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] 2900 and 3900 routers license

 

You should only need to do this if you are upgrading a router from what
it currently has to a different version. If you purchase it with the
correct bundle new then it has already been registered. 

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ahmed Elnagar
Sent: Wednesday, June 30, 2010 6:27 PM
To: Jason Aarons (US)
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 2900 and 3900 routers license

 

I have just did it today with the normal approach "just for one router"
I used the PAK on Cisco.com and downloaded the file then applied it to
the router...pretty straight forward.

 

 Best Regards;

  Ahmed Elnagar

  Senior Network PS Engineer

  Mob: +2019-0016211

  CCIE#24697 (Voice)

 

 

From: Jason Aarons (US) [mailto:jason.aarons at us.didata.com] 
Sent: Wednesday, June 30, 2010 2:15 AM
To: Ahmed Elnagar; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] 2900 and 3900 routers license

 

Cisco License Manager or CLI.

 

Can you do it in Cisco Configuration Professional ?

 

http://etherealmind.com/ios-15-licensing-how-we-work/

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ahmed Elnagar
Sent: Tuesday, June 29, 2010 6:55 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 2900 and 3900 routers license

 

Dear all;

 

I have a 2911 router with a PAK number purchased to activate unified
communication part on the router "imagine a router not supporting
dial-peer command J"....I am asking what is the approach you take to
install that license...I read Cisco License Call Home feature I found it
very cool to do it...what about you...what method are you using?

 

Plus anyone has a reference of what is outside the scope of unified
communication license and needs a separate license "I mean "from a
technically point of view" activation key, I don't care about the
purchasing part as another team do it" AFAIK the CUBE and gatekeeper
needs a separate license for them above the unified license applied to
the universal IOS image...what about SRST and other applications.

 

  Best Regards;

  Ahmed Elnagar

  Senior Network PS Engineer

 

 

  RAYA Building El Motamiez District, 6th of October, Egypt 

 

  Mob: +2019-0016211

  Phone: +202 3827 6000 Ext.2475

  Website: www.rayacorp.com <http://www.rayacorp.com/> 

  E-mail: ahmed_elnagar at rayacorp.com

  CCIE#24697 (Voice)

 

 

 

Disclaimer: NOTICE The information contained in this message is
confidential and is intended for the addressee(s) only. If you have
received this message in error or there are any problems please notify
the originator immediately. The unauthorized use, disclosure, copying or
alteration of this message is strictly forbidden. Raya will not be
liable for direct, special, indirect or consequential damages arising
from alteration of the contents of this message by a third party or as a
result of any malicious code or virus being passed on. Views expressed
in this communication are not necessarily those of Raya.If you have
received this message in error, please notify the sender immediately by
email, facsimile or telephone and return and/or destroy the original
message. 

________________________________

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you. 

 

Disclaimer: NOTICE The information contained in this message is
confidential and is intended for the addressee(s) only. If you have
received this message in error or there are any problems please notify
the originator immediately. The unauthorized use, disclosure, copying or
alteration of this message is strictly forbidden. Raya will not be
liable for direct, special, indirect or consequential damages arising
from alteration of the contents of this message by a third party or as a
result of any malicious code or virus being passed on. Views expressed
in this communication are not necessarily those of Raya.If you have
received this message in error, please notify the sender immediately by
email, facsimile or telephone and return and/or destroy the original
message. 

Disclaimer: NOTICE The information contained in this message is confidential and is intended for the addressee(s) only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorized use, disclosure, copying or alteration of this message is strictly forbidden. Raya will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any malicious code or virus being passed on. Views expressed in this communication are not necessarily those of Raya.If you have received this message in error, please notify the sender immediately by email, facsimile or telephone and return and/or destroy the original message. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100701/3dc66136/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1801 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100701/3dc66136/attachment.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1806 bytes
Desc: image002.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100701/3dc66136/attachment-0001.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 2210 bytes
Desc: image003.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100701/3dc66136/attachment-0002.jpe>


More information about the cisco-voip mailing list