[cisco-voip] 2900 and 3900 routers license

Thu Jul 1 09:59:13 EDT 2010

That is correct. But you didn't need to activate the security bundle
feature. It was activated before shipped. 

  _____  

From: Ahmed Elnagar [mailto:ahmed_elnagar at rayacorp.com] 
Sent: Thursday, July 01, 2010 8:57 AM
To: Bill
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] 2900 and 3900 routers license

No my router was purchased for Security bundle and then we needed to run it
as a voice gateway.

 Best Regards;

  Ahmed Elnagar

  Senior Network PS Engineer

  Mob: +2019-0016211

  CCIE#24697 (Voice)

 ccie_voice_large.gifccvp_voice_large.gif

From: Bill [mailto:bill at hitechconnection.net] 
Sent: Thursday, July 01, 2010 4:16 PM
To: Ahmed Elnagar; 'Jason Aarons (US)'
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] 2900 and 3900 routers license

You should only need to do this if you are upgrading a router from what it
currently has to a different version. If you purchase it with the correct
bundle new then it has already been registered. 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ahmed Elnagar
Sent: Wednesday, June 30, 2010 6:27 PM
To: Jason Aarons (US)
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 2900 and 3900 routers license

I have just did it today with the normal approach "just for one router" I
used the PAK on Cisco.com and downloaded the file then applied it to the
router.pretty straight forward.

 Best Regards;

  Ahmed Elnagar

  Senior Network PS Engineer

  Mob: +2019-0016211

  CCIE#24697 (Voice)

 ccie_voice_large.gifccvp_voice_large.gif

From: Jason Aarons (US) [mailto:jason.aarons at us.didata.com] 
Sent: Wednesday, June 30, 2010 2:15 AM
To: Ahmed Elnagar; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] 2900 and 3900 routers license

Cisco License Manager or CLI.

Can you do it in Cisco Configuration Professional ?

http://etherealmind.com/ios-15-licensing-how-we-work/

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ahmed Elnagar
Sent: Tuesday, June 29, 2010 6:55 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 2900 and 3900 routers license

Dear all;

I have a 2911 router with a PAK number purchased to activate unified
communication part on the router "imagine a router not supporting dial-peer
command :-)"..I am asking what is the approach you take to install that
license.I read Cisco License Call Home feature I found it very cool to do
it.what about you.what method are you using?

Plus anyone has a reference of what is outside the scope of unified
communication license and needs a separate license "I mean "from a
technically point of view" activation key, I don't care about the purchasing
part as another team do it" AFAIK the CUBE and gatekeeper needs a separate
license for them above the unified license applied to the universal IOS
image.what about SRST and other applications.

  Best Regards;

  Ahmed Elnagar

  Senior Network PS Engineer

untitled

  RAYA Building El Motamiez District, 6th of October, Egypt 

  Mob: +2019-0016211

  Phone: +202 3827 6000 Ext.2475

  Website: www.rayacorp.com <http://www.rayacorp.com/> 

  E-mail: ahmed_elnagar at rayacorp.com

  CCIE#24697 (Voice)

 ccie_voice_large.gifccvp_voice_large.gif

Disclaimer: NOTICE The information contained in this message is confidential
and is intended for the addressee(s) only. If you have received this message
in error or there are any problems please notify the originator immediately.
The unauthorized use, disclosure, copying or alteration of this message is
strictly forbidden. Raya will not be liable for direct, special, indirect or
consequential damages arising from alteration of the contents of this
message by a third party or as a result of any malicious code or virus being
passed on. Views expressed in this communication are not necessarily those
of Raya.If you have received this message in error, please notify the sender
immediately by email, facsimile or telephone and return and/or destroy the
original message. 

  _____  

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee, you
are hereby notified that you have received this communication in error and
that any use or reproduction of this email or its contents is strictly
prohibited and may be unlawful. If you have received this communication in
error, please notify us immediately by replying to this message and deleting
it from your computer. Thank you. 

Disclaimer: NOTICE The information contained in this message is confidential
and is intended for the addressee(s) only. If you have received this message
in error or there are any problems please notify the originator immediately.
The unauthorized use, disclosure, copying or alteration of this message is
strictly forbidden. Raya will not be liable for direct, special, indirect or
consequential damages arising from alteration of the contents of this
message by a third party or as a result of any malicious code or virus being
passed on. Views expressed in this communication are not necessarily those
of Raya.If you have received this message in error, please notify the sender
immediately by email, facsimile or telephone and return and/or destroy the
original message. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100701/217c1344/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1801 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100701/217c1344/attachment.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1806 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100701/217c1344/attachment-0001.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 2210 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100701/217c1344/attachment-0002.jpe>