[cisco-voip] If you hit ?? twice fast on phone does it show G711 A-Law vs G711 U-Law on the codec display?

[Jason Aarons (US)]

If you hit ?? twice fast on phone does it show G711 A-Law vs G711 U-Law on the codec display?

Call comes in H323 gateway 10.32.129.9 to CallManagerA 10.32.129.1 which passes it across InterCluster Trunk (non Gatekeeper) to another CallManagerB  which has 7961 phone.  CCM Traces show H.225 setup from 10.32.129.1 with Protocol = G.711 A-Law.

It shouldn't be G.711 A-Law but instead G.711 U-Law.  Would the codec be set wrong on dial-peer on 10.32.129.9 ?



-----------------------------------------
Disclaimer: 

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100706/c9e9984e/attachment.html>