[cisco-voip] If you hit ?? twice fast on phone does it show G711 A-Law vs G711 U-Law on the codec display?

[Ryan Ratliff]

Yes, it will show the specific variant of g.711 in the phone's call stats.  CUCM will always prefer g.711a over g.11u and the only place you could control this would be the dial-peers on the h.323 gateway.

-Ryan

On Jul 6, 2010, at 11:38 PM, Jason Aarons (US) wrote:

If you hit ?? twice fast on phone does it show G711 A-Law vs G711 U-Law on the codec display?
 
Call comes in H323 gateway 10.32.129.9 to CallManagerA 10.32.129.1 which passes it across InterCluster Trunk (non Gatekeeper) to another CallManagerB  which has 7961 phone.  CCM Traces show H.225 setup from 10.32.129.1 with Protocol = G.711 A-Law.
 
It shouldn’t be G.711 A-Law but instead G.711 U-Law.  Would the codec be set wrong on dial-peer on 10.32.129.9 ?


Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100707/5037f074/attachment.html>