[cisco-voip] Device > Gateway > H323 > Checking Media Termination Point Required and Enable Inbound FastStart

[Jason Aarons (US)]

I'm not a fan of forcing every call to "Use MTP Required" on Device > Gateway > H323 and Inbound Fast Start (which also forces MTP)

Anyone disagree with me that best practice says you don't use G729 as default codec and have CallManager doing Software MTP transcoding from G729 to G711 and vice

If you want transcoding you really should do it in hardware, eh?

I'm trying to figure out if someone knew what they were doing and wanted to force software transcoding at this customer...or didn't really know what they were doing.





-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100708/fab2a4c6/attachment.html>