[cisco-voip] Unity 5.x with Multiple Call Manager Clusters

[steve.siltman at assurant.com]

I've got a cheesy question.

While looking at the ports I see that when the MWI is set or cancelled, it 
is sent to each cluster rather than the cluster where the phone resides. 
It's the same everytime, I see MWI set to extension 28950 on port 120 and 
right when its finished it sends the same to Port 144.  I have 3 different 
clusters connected to this Unity pair.  Did I miss a routing configuration 
screen somewhere?

It's not causing an issue but it bothers me.  Wasted port usage. 

Thanks,

Steve 

This e-mail message and all attachments transmitted with it may
contain legally privileged and/or confidential information intended
solely for the use of the addressee(s). If the reader of this
message is not the intended recipient, you are hereby notified that
any reading, dissemination, distribution, copying, forwarding or
other use of this message or its attachments is strictly
prohibited. If you have received this message in error, please
notify the sender immediately and delete this message and all
copies and backups thereof. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100712/812f6f48/attachment.html>