[cisco-voip] : %VOICE_IEC-3-GW: C SCRIPTS: Internal Error (No dialpeer match): IEC=1.1.128.11.5.0 on callID 18951 GUID=F2F641098DDD11DF990CFCFBFBA11610

[Jason Aarons (US)]

Callers heard fast busy for about 10 minutes this morning.  This is a PSTN T1 PRI on a 2811 running 15.0(1)XA3. Show log I have never before seen this error, is this normally a IOS bug? I haven't setup voice statistics before reading the how-to article..

Show log
Jul 13 12:50:24 dst: %VOICE_IEC-3-GW: C SCRIPTS: Internal Error (No dialpeer match): IEC=1.1.128.11.5.0 on callID 18951 GUID=F2F641098DDD11DF990CFCFBFBA11610
Router2811#

Router2811 (config)#voice statistics time-range since-reset
Router2811 (config)#voice statis type iec
Router2811 (config)#exit
Router2811#show voice statistics iec since-reset
Internal Error Code counters
----------------------------
Counters since last reset (2010-07-13T13:40:02Z):
No errors.


System image file is "flash:c2800nm-spservicesk9-mz.150-1.XA3.bin"



-----------------------------------------
Disclaimer: 

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100713/72a808e4/attachment.html>