[cisco-voip] dial-plan modification

[Dennis Heim]

I would make a backup of your system and play with changes in vmware to be honest. The DN is stored in the numplan table. You would be largely making changes to the dnorpattern field. But as Eric, if you screw it up in production that is what we call a RAE (Resume Altering Event).

Dennis Heim
Network Voice Engineer
CDW  Advanced Technology Services
11711 N. Meridian Street, Suite 225
Carmel, IN  46032

317.569.4255 Office
317.569.4201 Fax
317.694.6070 Cell
dennis.heim at cdw.com<mailto:dennis.heim at cdw.com>
cdw.com/content/solutions/unified-communications/<http://www.cdw.com/content/solutions/unified-communications/>


From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Eric Butcher
Sent: Wednesday, July 14, 2010 11:10 AM
To: Ovidiu Popa
Cc: cisco-voip
Subject: Re: [cisco-voip] dial-plan modification

I'm not sure about any of that.  You don't have to necessarily be a DB Specialist to make the change, but you do have to be careful and have the right piece of software.  I'm not aware of any free applications out there, nor am I familiar with provisioning manager.


Eric Butcher
Cisco Unified Communications Engineer
CDW Professional Services
11711 N Meridian, Ste 225
Carmel, IN  46032
* 317.569.4282 - IP Phone
* 765.744.1458 - Mobile
* eric.butcher at cdw.com<mailto:eric.butcher at cdw.com>
http://www.cdw.com/


From: Ovidiu Popa [mailto:ovi.popa at gmail.com]
Sent: Wednesday, July 14, 2010 2:05 PM
To: Eric Butcher
Cc: cisco-voip
Subject: Re: [cisco-voip] dial-plan modification

I have around 900 IP phones in 2 locations + 900 EM profiles that I need to change because of a CTI application.

Ok, for the SQL but that means I need a DB specialist :(

Any free applications that do this via AXL that I'm not aware of?
Could we use a demo version of Cisco Provisioning Manager?

Thanks for the input.

Ovidiu

On Wed, Jul 14, 2010 at 7:52 PM, Eric Butcher <Eric.Butcher at cdw.com<mailto:Eric.Butcher at cdw.com>> wrote:
Can you elaborate a little?  You could make a special partition and put translation patterns in them to make it more scalable and flexible... If you want to just modify the DN's in bulk, I suggest using some SQL.  CUCM Plugins has an AXL SQL Toolkit you might be able to use for it.


Eric Butcher
Cisco Unified Communications Engineer
CDW Professional Services
11711 N Meridian, Ste 225
Carmel, IN  46032
* 317.569.4282 - IP Phone
* 765.744.1458 - Mobile
* eric.butcher at cdw.com<mailto:eric.butcher at cdw.com>
http://www.cdw.com/


From: cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net> [mailto:cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net>] On Behalf Of Ovidiu Popa
Sent: Wednesday, July 14, 2010 1:47 PM
To: cisco-voip
Subject: [cisco-voip] dial-plan modification

Hello everyone

Do you know any quick methods to change the dial-plan on a CUCM cluster (i.e. hardcoding a site code on every phone DN)?

Thanks,

Ovidiu







-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100714/d0296348/attachment.html>