[cisco-voip] CME MeetMe Join/Leave Tones

[Go0se]

!
voice class custom-cptone joining-tone
dualtone conference 
frequency 1000 1000 
cadence 150 50 150 50 
! 
! 
voice class custom-cptone leaving-tone
dualtone conference 
frequency 900 900 
cadence 150 50 150 50 
!
.
.
.
! 
dspfarm profile 1 conference 
!
! yadda yadda yadda
!
conference-join custom-cptone joining-tone 
conference-leave custom-cptone leaving-tone 
!

Thanks,

Go0se

My blog: 
http://atc.go0se.com

-------------------------------------
Help Hopegivers International 
feed the orphans of India.
http://www.hopegivers.org
-------------------------------------

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mark Holloway
Sent: Thursday, July 15, 2010 3:42 PM
To: cisco-voip at puck.nether.net list
Subject: [cisco-voip] CME MeetMe Join/Leave Tones

I'm trying to configure CME 7 to support MeetMe conferencing where Join and
Leave tones are heard as participants come and go.  MeetMe is working fine,
but I cannot get the tones to play. Does anyone have an example
configuration that works?


I found this example on Cisco's site but this is not playing the tones when
participants join or leave..

voice class custom-cptone MeetMe
 dualtone conference
  frequency 600 900
  cadence 300 150 300 100 300 50



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip