[cisco-voip] CME MeetMe Join/Leave Tones

[Mark Holloway]

Go0se...awesome.  Thanks you! :)


On Jul 15, 2010, at 2:05 PM, Go0se wrote:

> !
> voice class custom-cptone joining-tone
> dualtone conference 
> frequency 1000 1000 
> cadence 150 50 150 50 
> ! 
> ! 
> voice class custom-cptone leaving-tone
> dualtone conference 
> frequency 900 900 
> cadence 150 50 150 50 
> !
> .
> .
> .
> ! 
> dspfarm profile 1 conference 
> !
> ! yadda yadda yadda
> !
> conference-join custom-cptone joining-tone 
> conference-leave custom-cptone leaving-tone 
> !
> 
> Thanks,
> 
> Go0se
> 
> My blog: 
> http://atc.go0se.com
> 
> -------------------------------------
> Help Hopegivers International 
> feed the orphans of India.
> http://www.hopegivers.org
> -------------------------------------
> 
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mark Holloway
> Sent: Thursday, July 15, 2010 3:42 PM
> To: cisco-voip at puck.nether.net list
> Subject: [cisco-voip] CME MeetMe Join/Leave Tones
> 
> I'm trying to configure CME 7 to support MeetMe conferencing where Join and
> Leave tones are heard as participants come and go.  MeetMe is working fine,
> but I cannot get the tones to play. Does anyone have an example
> configuration that works?
> 
> 
> I found this example on Cisco's site but this is not playing the tones when
> participants join or leave..
> 
> voice class custom-cptone MeetMe
> dualtone conference
>  frequency 600 900
>  cadence 300 150 300 100 300 50
> 
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>