[cisco-voip] Plus dialing from hardware phones

[Ahmed Elnagar]

I have seen a + key on the 9971 phone but still did not figure out how to use it

 Best Regards;
  Ahmed Elnagar
  Senior Network PS Engineer
  Mob: +2019-0016211
  CCIE#24697 (Voice)
 


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Wes Sisk
Sent: Thursday, July 15, 2010 7:05 PM
To: Maciej Karpinski
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Plus dialing from hardware phones

Look for an upcoming feature tentatively in 9.1 phone software.  As it 
is a new feature your Cisco account team can provide more details.

/Wes

On Thursday, July 15, 2010 5:04:11 AM, Maciej Karpinski 
<maciej.karpinski at consign.se> wrote:
> Hi
>
> Does any one know if it is possible to get a + on for example a Cisco 
> 7942 on 7921 and 7925 phones you just need to hold down the 0 for a 
> while but we would want to do it on other phones too.
>
> Or has anyone heard that there are plans to implement it on the phones?
>
> Br.
> Maciej
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
Disclaimer: NOTICE The information contained in this message is confidential and is intended for the addressee(s) only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorized use, disclosure, copying or alteration of this message is strictly forbidden. Raya will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any malicious code or virus being passed on. Views expressed in this communication are not necessarily those of Raya.If you have received this message in error, please notify the sender immediately by email, facsimile or telephone and return and/or destroy the original message.