[cisco-voip] Missed Calls Date in CDR - CCM4.2.3

[Ahmed Elnagar]

It will always be 0 as the call never connected...check date time org.

 

 Best Regards;

  Ahmed Elnagar

  Senior Network PS Engineer

  Mob: +2019-0016211

  CCIE#24697 (Voice)

  

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of dev
Sent: Sunday, July 18, 2010 10:17 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Missed Calls Date in CDR - CCM4.2.3

 

Hi,
 
We need to generate a missed calls report from CCM 4.2
CDR flags are enabled and "Log Calls with Zero Duration" flag is also
enabled.
 
The problem is that all missed calls are logged in the CDR with a Date
of "0". The "dateTimeConnect" is always Zero.
This way, it is not possible to get the date and time of individual
missed calls.
 
Any suggestions?
 
Thanks

Disclaimer: NOTICE The information contained in this message is confidential and is intended for the addressee(s) only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorized use, disclosure, copying or alteration of this message is strictly forbidden. Raya will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any malicious code or virus being passed on. Views expressed in this communication are not necessarily those of Raya.If you have received this message in error, please notify the sender immediately by email, facsimile or telephone and return and/or destroy the original message. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100718/f4bc4fc4/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 1801 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100718/f4bc4fc4/attachment.jpe>