[cisco-voip] Missing CDR data

[Ahmed Elnagar]

although very trivial but a lot of times it is been forgotten :)
Make sure that CDR enabled flag is enabled on all call processing servers "it is not a cluster wide parameter"

 Best Regards;
  Ahmed Elnagar
  Senior Network PS Engineer
  Mob: +2019-0016211
  CCIE#24697 (Voice)
 

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Fuermann, Jason
Sent: Monday, July 19, 2010 6:30 PM
To: cisco-voip
Subject: [cisco-voip] Missing CDR data

CM 7.0.2
Is anybody aware of a CDR bug where UCM fails to generate CDR data for calls? I found CSCsk76737, but I wasn't logging at the info or debug level for the scheduler, so I check if that's the problem. Anything else anybody knows of?

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
Disclaimer: NOTICE The information contained in this message is confidential and is intended for the addressee(s) only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorized use, disclosure, copying or alteration of this message is strictly forbidden. Raya will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any malicious code or virus being passed on. Views expressed in this communication are not necessarily those of Raya.If you have received this message in error, please notify the sender immediately by email, facsimile or telephone and return and/or destroy the original message.