[cisco-voip] [OSL | CCIE_Voice] Meetme: cannot use join select softkeys to join 3rd call to meetme conference

[jeremy co]

I'm not disagreeing with you.   So what is the usage of select and join key
that mentioned in CME admin guide , conference section ?


Cheers,

Jeremy

On Thu, Jul 22, 2010 at 6:00 PM, Ashar Siddiqui <siddashar at gmail.com> wrote:

>  I don’t think it would work that way.
>
>
>
> All participants must come through by dialling meetme number to join a
> meetme conf (this is what I think) otherwise it won’t work.
>
>
>
> Ash>
>
>
>
> *From:* jeremy co [mailto:jeremy.cool14 at gmail.com]
> *Sent:* 22 July 2010 08:51
> *To:* Ashar Siddiqui
> *Cc:* ccie_voice at onlinestudylist.com; cisco-voip at puck.nether.net
> *Subject:* Re: [OSL | CCIE_Voice] Meetme: cannot use join select softkeys
> to join 3rd call to meetme conference
>
>
>
> Ph1 go to seized state and then press meetme softkey then dial 4200 (meetme
> number) and ph2 and ph3 call to 4200 to join the conference.
>
>
>
> As I want to test join softkey feature , I made a call from PSTN to 4013.
> PH1 answer the call and then I try to join 4013 and 4200 togther using
> "select" and "join" key which is not working.
>
>
>
>
>
>
>
> Cheers,
>
>
>
>
>
> Jeremy
>
> On Thu, Jul 22, 2010 at 5:42 PM, Ashar Siddiqui <siddashar at gmail.com>
> wrote:
>
> Sorry didn’t understand this bit “Ph1 create meetme conference and ph2 and
> ph3 joins to conference. PSTN call 4013 and ph1 picks up the call”.
>
>
>
> PSTN should call DDI of meet me number like XXXXXX4200 and I believe it
> will go directly in conference. Why PSTN is dialling 4013??
>
>
>
> Ash>
>
>
>
> *From:* ccie_voice-bounces at onlinestudylist.com [mailto:
> ccie_voice-bounces at onlinestudylist.com] *On Behalf Of *jeremy co
> *Sent:* 22 July 2010 04:32
> *To:* ccie_voice at onlinestudylist.com; cisco-voip at puck.nether.net
> *Subject:* [OSL | CCIE_Voice] Meetme: cannot use join select softkeys to
> join 3rd call to meetme conference
>
>
>
> Hi All,
>
>
>
> I set up a meetme conference and assigned template to ephones with
> appropriate keys. I cannot join another call to conference call.
>
>
>
>
>
> Here is what happen:
>
>
>
> meetme:4200
>
>
>
> Ph1 :    L1:4001    L3:4013
>
> ph2:     L1:4002     L3:4013
>
> ph3 :4003
>
>
>
>
>
> Ph1 create meetme conference and ph2 and ph3 joins to conference. PSTN call
> 4013 and ph1 picks up the call.
>
>
>
> Using "select"  key , I select 4013 call on line3. then I switch to line 1
> (4001) and press "select" , but nothing happens. So I cannot use "join"
> softkey later to join 2 calls.
>
>
>
> telephony-service
>
>  sdspfarm units 3
>
>  sdspfarm transcode sessions 4
>
>  sdspfarm tag 1 XCODER
>
>  sdspfarm tag 2 CFBCFB
>
>  no privacy
>
>  conference hardware
>
>  load 7960-7940 P0030702T023
>
>  load 7941 SCCP41.8-3-3S.loads
>
>  load 7961 SCCP41.8-3-3S.loads
>
>  load 7961GE SCCP41.8-3-3S
>
>  max-ephones 30
>
>  max-dn 100
>
>  ip source-address 142.4.30.3 port 2000
>
>  auto assign 1 to 1
>
>  cnf-file location flash:
>
>  dialplan-pattern 1 24044... extension-length 4
>
>  max-conferences 4 gain -6
>
>  transfer-system full-consult
>
>
>
>
>
> ephone-template  9
>
>  softkeys hold  Select Join Resume Newcall
>
>  softkeys seized  Meetme Redial Cfwdall Endcall Gpickup Pickup Callback
>
>  softkeys connected  Hold Endcall Trnsfer Select RmLstC Join ConfList
> Confrn
>
> ephone-template  20
>
>  softkeys hold  Select Join Resume Newcall
>
>  softkeys connected  Hold Endcall Trnsfer Select RmLstC Join ConfList
> Confrn
>
> ephone-dn  1  dual-line
>
>  number 4001
>
>  description +85224044001
>
>  name BR2PH1
>
>  allow watch
>
> ephone-dn  2
>
>  number 4002
>
>   name BR2PH2
>
> ephone-dn  3
>
>  number 4003
>
>  name BR2PH3
>
> ephone-dn  13  octo-line
>
>  number 4013
>
>  name Shared line
>
>
>
>
>
> ephone-dn  21  octo-line
>
>  number 4200
>
>  conference meetme
>
>
>
> ephone  1
>
>  mac-address 000C.29B6.6BFC
>
>  ephone-template 9
>
>  type CIPC
>
>  button  1:1 2:15 6:13
>
> ephone  2
>
>  mac-address 000C.29F9.A7F2
>
>  ephone-template 20
>
>  max-calls-per-button 3
>
>  busy-trigger-per-button 2
>
>  blf-speed-dial 1 4001 label "BLF4001"
>
>  type CIPC
>
>  button  1:2 2:16 6:13 7w1
>
> ephone  3
>
>  privacy-button
>
>  description +85224044003
>
>  mac-address 000C.298A.DC67
>
>  ephone-template 20
>
>  type CIPC
>
>  button  1:3 6:11
>
> ephone  4
>
>  mac-address 0005.9BF1.9C4F
>
>  ephone-template 9
>
>  type 7960
>
>  button  1:1 2:15 6:13
>
>
>
>
>
>
>
> cheers,
>
>
>
>
>
> Jeremy
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100722/f09b24e1/attachment.html>