[cisco-voip] [OSL | CCIE_Voice] Meetme: cannot use join select softkeys to join 3rd call to meetme conference

Thu Jul 22 04:49:58 EDT 2010

>From admin guideL

Soft Keys for Conference Functions
In Cisco Unified CME 4.1 and later versions, the following soft keys provide
conferencing functions for
multi-party conferencing enhancements on your phone:
• ConfList—Conference list. Lists all parties in a conference. For ad hoc
conferences, this soft key is
available for all parties in a conference. For meet-me conferences, this
soft key is available for the
creator only. Press Update to update the list of parties in the conference,
for instance, to verify that
a party has been removed from the conference.
• *Join*—Joins an established call to a conference. You must first press
Select to choose each
connected call that you want to join in a conference, then press Join to
join the selected calls to the
conference.
• RmLstC—Remove last caller. Removes the last party added to the conference.
This soft key works
for the creator only.
• *Select*—Selects a call or conference to join to a conference and selects
a call to remove from a
conference. The creator can remove other parties by pressing the ConfList
soft key, then use the
Select and Remove soft keys to remove the appropriate parties.
• MeetMe—Initiates a meet-me conference. The creator presses this soft key
before dialing the
conference number. Other meet-me conference parties only dial the conference
number to join the
conference. This soft key must be configured before you can initiate meet-me
conferences.

SCCP: Configuring Conferencing Options for a Phone

cheers,

Jeremy

also look at section called:
On Thu, Jul 22, 2010 at 6:33 PM, Ashar Siddiqui <siddashar at gmail.com> wrote:

>  From the admin guide:
>
>
>
> *Meet-Me Conferencing in Cisco Unified CME 4.1 and Later versions *
>
> In Cisco Unified CME 4.1 and later versions, meet-me conferences consist of
> at least three parties dialing a meet-me conference number predetermined by
> a system administrator. For example, the conference shown in Figure 24<http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeconf.html#wp1010511>is created when the conference creator at extension 1215 presses the MeetMe
> soft key and hears a confirmation tone, then dials the meet-me conference
> number 1500. Extension 1225 and extension 1235 join the meet-me conference
> by dialing 1500. Extensions 1215, 1225, and 1235 are now parties in a
> meet-me conference on extension 1500.
>
> MeetMe—Initiates a meet-me conference. The creator presses this soft key
> before dialing the conference number. Other meet-me conference parties *only
> dial the conference number to join the conference*. This soft key must be
> configured before you can initiate meet-me conferences.
>
> Join key can be used in normal conferencing.
>
>
>
> Ash>
>
>
>
> *From:* jeremy co [mailto:jeremy.cool14 at gmail.com]
> *Sent:* 22 July 2010 09:19
>
> *To:* Ashar Siddiqui
> *Cc:* ccie_voice at onlinestudylist.com; cisco-voip at puck.nether.net
> *Subject:* Re: [OSL | CCIE_Voice] Meetme: cannot use join select softkeys
> to join 3rd call to meetme conference
>
>
>
> I'm not disagreeing with you.   So what is the usage of select and join key
> that mentioned in CME admin guide , conference section ?
>
>
>
>
>
> Cheers,
>
>
>
> Jeremy
>
> On Thu, Jul 22, 2010 at 6:00 PM, Ashar Siddiqui <siddashar at gmail.com>
> wrote:
>
> I don’t think it would work that way.
>
>
>
> All participants must come through by dialling meetme number to join a
> meetme conf (this is what I think) otherwise it won’t work.
>
>
>
> Ash>
>
>
>
> *From:* jeremy co [mailto:jeremy.cool14 at gmail.com]
> *Sent:* 22 July 2010 08:51
> *To:* Ashar Siddiqui
> *Cc:* ccie_voice at onlinestudylist.com; cisco-voip at puck.nether.net
> *Subject:* Re: [OSL | CCIE_Voice] Meetme: cannot use join select softkeys
> to join 3rd call to meetme conference
>
>
>
> Ph1 go to seized state and then press meetme softkey then dial 4200 (meetme
> number) and ph2 and ph3 call to 4200 to join the conference.
>
>
>
> As I want to test join softkey feature , I made a call from PSTN to 4013.
> PH1 answer the call and then I try to join 4013 and 4200 togther using
> "select" and "join" key which is not working.
>
>
>
>
>
>
>
> Cheers,
>
>
>
>
>
> Jeremy
>
> On Thu, Jul 22, 2010 at 5:42 PM, Ashar Siddiqui <siddashar at gmail.com>
> wrote:
>
> Sorry didn’t understand this bit “Ph1 create meetme conference and ph2 and
> ph3 joins to conference. PSTN call 4013 and ph1 picks up the call”.
>
>
>
> PSTN should call DDI of meet me number like XXXXXX4200 and I believe it
> will go directly in conference. Why PSTN is dialling 4013??
>
>
>
> Ash>
>
>
>
> *From:* ccie_voice-bounces at onlinestudylist.com [mailto:
> ccie_voice-bounces at onlinestudylist.com] *On Behalf Of *jeremy co
> *Sent:* 22 July 2010 04:32
> *To:* ccie_voice at onlinestudylist.com; cisco-voip at puck.nether.net
> *Subject:* [OSL | CCIE_Voice] Meetme: cannot use join select softkeys to
> join 3rd call to meetme conference
>
>
>
> Hi All,
>
>
>
> I set up a meetme conference and assigned template to ephones with
> appropriate keys. I cannot join another call to conference call.
>
>
>
>
>
> Here is what happen:
>
>
>
> meetme:4200
>
>
>
> Ph1 :    L1:4001    L3:4013
>
> ph2:     L1:4002     L3:4013
>
> ph3 :4003
>
>
>
>
>
> Ph1 create meetme conference and ph2 and ph3 joins to conference. PSTN call
> 4013 and ph1 picks up the call.
>
>
>
> Using "select"  key , I select 4013 call on line3. then I switch to line 1
> (4001) and press "select" , but nothing happens. So I cannot use "join"
> softkey later to join 2 calls.
>
>
>
> telephony-service
>
>  sdspfarm units 3
>
>  sdspfarm transcode sessions 4
>
>  sdspfarm tag 1 XCODER
>
>  sdspfarm tag 2 CFBCFB
>
>  no privacy
>
>  conference hardware
>
>  load 7960-7940 P0030702T023
>
>  load 7941 SCCP41.8-3-3S.loads
>
>  load 7961 SCCP41.8-3-3S.loads
>
>  load 7961GE SCCP41.8-3-3S
>
>  max-ephones 30
>
>  max-dn 100
>
>  ip source-address 142.4.30.3 port 2000
>
>  auto assign 1 to 1
>
>  cnf-file location flash:
>
>  dialplan-pattern 1 24044... extension-length 4
>
>  max-conferences 4 gain -6
>
>  transfer-system full-consult
>
>
>
>
>
> ephone-template  9
>
>  softkeys hold  Select Join Resume Newcall
>
>  softkeys seized  Meetme Redial Cfwdall Endcall Gpickup Pickup Callback
>
>  softkeys connected  Hold Endcall Trnsfer Select RmLstC Join ConfList
> Confrn
>
> ephone-template  20
>
>  softkeys hold  Select Join Resume Newcall
>
>  softkeys connected  Hold Endcall Trnsfer Select RmLstC Join ConfList
> Confrn
>
> ephone-dn  1  dual-line
>
>  number 4001
>
>  description +85224044001
>
>  name BR2PH1
>
>  allow watch
>
> ephone-dn  2
>
>  number 4002
>
>   name BR2PH2
>
> ephone-dn  3
>
>  number 4003
>
>  name BR2PH3
>
> ephone-dn  13  octo-line
>
>  number 4013
>
>  name Shared line
>
>
>
>
>
> ephone-dn  21  octo-line
>
>  number 4200
>
>  conference meetme
>
>
>
> ephone  1
>
>  mac-address 000C.29B6.6BFC
>
>  ephone-template 9
>
>  type CIPC
>
>  button  1:1 2:15 6:13
>
> ephone  2
>
>  mac-address 000C.29F9.A7F2
>
>  ephone-template 20
>
>  max-calls-per-button 3
>
>  busy-trigger-per-button 2
>
>  blf-speed-dial 1 4001 label "BLF4001"
>
>  type CIPC
>
>  button  1:2 2:16 6:13 7w1
>
> ephone  3
>
>  privacy-button
>
>  description +85224044003
>
>  mac-address 000C.298A.DC67
>
>  ephone-template 20
>
>  type CIPC
>
>  button  1:3 6:11
>
> ephone  4
>
>  mac-address 0005.9BF1.9C4F
>
>  ephone-template 9
>
>  type 7960
>
>  button  1:1 2:15 6:13
>
>
>
>
>
>
>
> cheers,
>
>
>
>
>
> Jeremy
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100722/4bf0fdf6/attachment.html>