[cisco-voip] CUPS 7.0(8) in VMWare ESX

[James Buchanan]

The hard drive is too small. It must be a minimum of 72GB. 

 

I have successfully installed this in a lab setting. 

 

Thanks,

 

James Buchanan | Senior Network Engineer | South Region | Presidio
Networked Solutions 
12 Cadillac Dr, Suite 130, Brentwood, TN 37027 | jbuchanan at presidio.com
<mailto:jbuchanan at ctiusa.com> 
D: 615-866-5729 | F: 615-866-5781 | www.presidio.com
<http://www.presidio.com>  <http://www.presidio.com
<http://www.presidio.com> > 

CCIE #25863, Voice



 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Reto Gassmann
Sent: Friday, July 23, 2010 4:24 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CUPS 7.0(8) in VMWare ESX

 

Hello Group

 

I try to install CUPS 7.0(8) on our VMWare ESX Server.

I used the following settings:

 

Red Hat Enterprise Linux 4
2 CPU
Memory 2048 MB
LSI SCSI Controller
30GB Hard Drive

 

The installation starts and I can enter all the requested information.
Then the instaallation starts an I get the following error message:

No Drives Found

An error has occured - no valid devices were found on which to create
new file systems. Please check your hardware for the cause of this
problem.

 

After that the installation quits and the VM shuts down.

 

Has anyone succesfully installed CUPS on an ESX Server?

 

Thanks for help

Reto

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100723/687a9d91/attachment.html>