[cisco-voip] CUPS 7.0(8) in VMWare ESX

[Mark Holloway]

I also had better luck using IDE for CUPS7 but I think it was 7.01

On Jul 23, 2010, at 3:07 AM, James Buchanan wrote:

> The hard drive is too small. It must be a minimum of 72GB.
>  
> I have successfully installed this in a lab setting.
>  
> Thanks,
>  
> James Buchanan | Senior Network Engineer | South Region | Presidio Networked Solutions 
> 12 Cadillac Dr, Suite 130, Brentwood, TN 37027 | jbuchanan at presidio.com
> D: 615-866-5729 | F: 615-866-5781 | www.presidio.com <http://www.presidio.com>
> CCIE #25863, Voice
> 
>  
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Reto Gassmann
> Sent: Friday, July 23, 2010 4:24 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] CUPS 7.0(8) in VMWare ESX
>  
> Hello Group
>  
> I try to install CUPS 7.0(8) on our VMWare ESX Server.
> I used the following settings:
>  
> Red Hat Enterprise Linux 4
> 2 CPU
> Memory 2048 MB
> LSI SCSI Controller
> 30GB Hard Drive
>  
> The installation starts and I can enter all the requested information. Then the instaallation starts an I get the following error message:
> No Drives Found
> An error has occured - no valid devices were found on which to create new file systems. Please check your hardware for the cause of this problem.
>  
> After that the installation quits and the VM shuts down.
>  
> Has anyone succesfully installed CUPS on an ESX Server?
>  
> Thanks for help
> Reto
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20100723/e3872f07/attachment.html>