[cisco-voip] Auto login IP Phone Agent

[Ed Leatherman]

I have used this with UCCX 4 up to 7 so far with no problems.

Make sure the ID, Ext, Pwd variables are exactly how they appear in
the doc, I think they might be case sensitive.Might just have one of
them off and so it re-prompts for the login.

If you want to really make it easy for them and have enough buttons,
you can also setup service buttons for "ready" etc as well. they are
just calls to URL with different parameters.

On Fri, Jul 23, 2010 at 7:51 AM, Marty van de Veerdonk
<marty at voiceidentity.nl> wrote:
> Hello,
> i'm using IP phone agent on CCM6 to contact to ICM 7.
> The service url works, but I would like to make login procedure
> automatically.
>
> Used this manual, but still I need to enter the ID, ext and password
> http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a008029e6d5.shtml#procConfiguring
>
> Any ideas?
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>



-- 
Ed Leatherman